Interesting find of Enfield armourer's tools.

[Sasquatch807]

I posted this on CGN and member Gibbs505 suggested I try Milsurps.com.

A retired smith who had sold me a bunch of Enfield parts last winter called me back and offered me his Enfield gages and tools. I purchased them so here's a pic.

From left to right.

Top row: Oiler, crowning tool, firing pin protrusion gage.

Middle row: Go/No-go chamber gages, bore gauges, bore condemnation and throat erosion gages.

Bottom row: Body & barrel assembly gages, home made barrel wrench and barrel vise sleeves.

Note: Some of the tools are marked with the C broad arrow, others have a company names (C.Oxweld ?, Canadian Arsenals) and some have part numbers stamped or electro-penciled on them.
As for the crowning tool, does anyone here know how the armourer aligned it with the bore ? There is no "pilot" system on this tool, was there another part that fit over the barrel and aligned the bore ? Can anyone here tell me how the crown repair cutter was operated ?

And how do you use the two bore gages (.308 & .310 in the middle of the picture) ?

[IMG][/IMG]

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.