T4 7.62 magazine

[Chubbs]

I have two of these mags but the little piece of metal that is welded on the lip of the mag is missing on both. You can see where they were. So they are definitely the right ones.

Does any one have the dimensions of the metal so I can see if i can fabricate some and the get them reattached.
Attachment 84361


Regards Chubbs

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Peter Laidler]

These were defective repros and were always failing. Brian at BDL had some and had them repaired. Ask him how he went about it. Or ask Fultons. They MUST have encountered them!

Incidentally, you'd have got more responses if you'd just put this under the Lee Enfield part of the forum as they're really just repro L42 magazines - without the quality!

[Chubbs]

Thanks Peter

Brian has kindly given me the measurements.

Regards Chubbs

[Gil Boyd]

Chubbs,
Might be worth putting a want out on this site, someone is bound to have a couple to sell. Only reason I say that, is to fabricate and get the right angle could be a challenge once done. Buy the real deal, always saves a lot of time & tears in the long run IMHO