-
FREE MEMBER
NO Posting or PM's Allowed
Recipie for .30 carbine cast bullet loads
I came into a box of 500 115 grn cast bullets for the .30 carbine recently. These are non-gas checked, so I suspect I will have to keep velocities down to about 1200 fps. Does anyone have a load for cast bullets for the .30 carbine?
Thanks
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
03-13-2009 12:04 PM
# ADS
Friends and Sponsors
-
Legacy Member
I use around 13.0 gr of IMR4227. Works well in my carbines with no check bullets from 115 gr up to 130 gr. I haven't had any leading problems with that load. I cast them fairly hard and keep the velocities moderate (up to 1500 fps).
When they tell you to behave, they always forget to specify whether to behave well or badly!
-
-
-
Legacy Member
-
-
FREE MEMBER
NO Posting or PM's Allowed
My plain base cast bullets weigh in at 100 grains, and I am using 12.5gr of 2400 and 14.0gr of H4227.
Don
-
FREE MEMBER
NO Posting or PM's Allowed
Thanks fellows...
Just the kind of data I needed.
Mark Hubbs