-
douglass
Guest
lee enfield mounts
hi all,
looking for any advice on a good set of mounts and best type of scope to use on my Number 4 enfield, price hinders me as nothing toooooooooo great
any help appreciated
douglas
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
12-07-2010 02:13 PM
# ADS
Friends and Sponsors
-
Hi Douglas ..
Look up and to the right of the web site screen and you'll see a white search box there titled Google Custom Search. Type the phrase (without the quotes) "enfield scope mount" and also try "enfield scope pads" and see what turns up.
You may also want to try other phrases as part of the search process.
Regards,
Doug
-
-
-
Legacy Member
Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...
-
-
FREE MEMBER
NO Posting or PM's Allowed
Howdy...saw your message and thought I'd report what I'd done. Numrich is selling a reproduction of the original mount the British used for the sniper rifles. As with the originals it requires gunsmithing to install but the mount is rock solid!!!!!!! I am thrilled with the way it turned out. I have a No4 Mk1.Greg
-
Legacy Member
I am in the process of getting together repro stuff to put mounts on two No4s. I figure that if I do anything that requires drilling, I should put on mounts that were tested to the rigours of combat rather than tested to the rigours of least cost.
If you don't want to drill, then there are plenty of non drill mounts that look good.
-
-
My opinion for anyone going down the route of putting a telescope onto a No4 is this. Sorry to be a bit brutal, but it's what I call the bleedin' obvious. If it means drilling and tapping the body then don't bother. If you MUST, then just get yourself a repro set of No4T pads and bracket and mount them instead. This way, at least you'll have yourself a replica/repro No4T for when the real scope turns up (yes, it will, later, when you're least expecting it.....) If you do it any other way, when the real scope DOES turn up, you've got to start again and sell the now worthless bit of tat that you've got
Thinking about putting a telescope onto a No4, then read that again..................
-
The Following 2 Members Say Thank You to Peter Laidler For This Useful Post:
-
Legacy Member
Just get a Fultons no drill mount
-
-
Fultons no drill mounts - the very BEST of the cheap options in my opinion (sorry for that Fultons.....) Bindi. But as I prophesied an hour or so ago, even replica telescopes are available now so what is there to stop anyone wanting a telescoped No4 from getting themselves the replica bits to make up a reasonably good No4T replica. You won't fool anyone but you've got a good passable rifle that will give many years of pleasure - at 1/4 the price.
Not only that chaps, but think about this. On this very site is all the know how, written down for all to see, about how to do the job properly, first time. With the pads, brackets and now the scope, albeit decent replicas, available, what more do you want. Another small point is that when you come to sell it, while it won't be original, it'll still be worth twice what you paid for it and valued at more than the sum of the parts. That's only my opinion though!
Last edited by Peter Laidler; 12-11-2010 at 06:53 AM.
Reason: speeeling misteaks
-
Thank You to Peter Laidler For This Useful Post:
-
Legacy Member
No aurgument with you Peter only that the majority will not get the alignment right and Botch the job leaving a collectable rifle Bubbadd or somebody else with a rifle that wont shoot to where it should.
-
-
Oh ye of little faith Bindi........ If they follow the instructions to the letter, they'll crack it. Already a couple have tried and succeeded including Oxford Andy and a couple of others who's names I've forgotten (It's age you understand.....).
If anyone else out there in Forum land is doing it, or getting someone more proficient than themselves to do it, don't forget that YOU tell THEM what you want and they've got to follow the instructions. If you're using all-new from scratch, it should be relatively simple. The good bit about this way is that with the pads soldered to the rifle while you are aligning/collimating/borsighting everything, you don't mark, drill or tap anything until it's all done and dusted
Sorry if I sound toooooo enthusiastic!
-