-
FREE MEMBER
NO Posting or PM's Allowed
I want to start reloading 557/450 HELP
I need brass,etc etc
appreciate any sale offers or link to where i can get all I need.
Thanks
Rick
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
10-12-2009 03:09 PM
# ADS
Friends and Sponsors
-
Advisory Panel
You will find a lot of help with the 577/450 in the Martini and Reloading forums at this website.
British Militaria Forums - Message Board - Yuku
The guys there have tried out just about everything, and know where to get what you need. But before you plunge in, are you prepared for a budgetary shock when you find out what the cases cost? You will need not only reloading dies, but a neck-sizing die to make those cases last, and you will have to cast your own bullets. All very, very pricy.
Look up the site mentioned above, and ask for help. I'm sure you will get plenty.
Patrick
-
-
-
Legacy Member
make sure you grab a "can" of TRAILBOSS powder. The case is even more cavernous than a 45-70 and safe charges of most appropriate powders leave a lot of empty space in the case.
HERE IS AN ARTICLE on TB is Martini Henry rifles as FYI:
Martini Henry Chamber Pressures - Cartridges and Reloading - Old Guns - British Militaria Forums - Message Board - Yuku
-
Thank You to AKA Hugh Uno For This Useful Post: