+ Reply to Thread
Results 1 to 6 of 6

Thread: Enfield Experts! - I Need Your Help!

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    CapnHawk's Avatar
    Join Date
    Oct 2009
    Last On
    07-18-2017 @ 12:21 AM
    Location
    Los Angeles
    Posts
    4
    Local Date
    05-23-2024
    Local Time
    10:29 AM

    Enfield Experts! - I Need Your Help!

    I have two Enfield Riflesicon (safe queens) that I inherited from my late father. I was wondering if any of you could share your expertise with a relatively new member (Me!) and let me know what I have.

    1. Enfield No. 4 MK 2 .303 cal. that looks to be unfired and, save for a couple of minor safe scratches, appears to be in mint condition. It has a Mannlicher-type stock. The receiver is stamped UF 55 A 2001. The magazine, as well as the stock, are stamped 2001. It also has sling swivels and a polished brass butt plate.

    2. Enfield .303 cal. No. 5 MK 1 (Jungle Carbine?) with a 20.5 inch barrel and flash hider. The metal parts appear to have been painted a semi-gloss black. The stock looks original and well handled. The receiver is marked ROF (F) 11/44 C7358.

    I know that photos would help but my camera is down. Any help is greatly appreciated. Thank you.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-23-2024
    Local Time
    01:29 PM
    What do you want to know?

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    snoopy95's Avatar
    Join Date
    Oct 2010
    Last On
    03-01-2011 @ 05:06 AM
    Location
    Bellaire, Ohio, USA
    Posts
    4
    Local Date
    05-23-2024
    Local Time
    12:29 PM
    I have recently acquired through a trade an enfield No.4 Mk1, Long Branch 1942. It does not have anyother markings stamped into the metal except for the serial number. The butt of the weapon looks to be either made of alumium or similar shiney metal. I am trying to see where this weapon actually originated from or may have been during WWII. I would also like to know what this weapon might be worth for inventory purposes, I don't sell, I normally just trade.
    Thanks for your help.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    CapnHawk's Avatar
    Join Date
    Oct 2009
    Last On
    07-18-2017 @ 12:21 AM
    Location
    Los Angeles
    Posts
    4
    Local Date
    05-23-2024
    Local Time
    10:29 AM
    Thread Starter
    My primary question is whether I have anything special or are both Enfields run-of-the-mill models. I normally don't deal in long arms, so these rifles may be on the trading block.

  7. #5
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    05-23-2024
    Local Time
    01:29 PM
    Nothing spectacular, but they sound like nice rifles. The No.4 Mk.2 is a very late rifle, basically the last year of production in Englandicon of the No.4. The No.5 is fairly early, but not unusual otherwise, I think.

  8. #6
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    05-23-2024
    Local Time
    01:29 PM
    Number 4 Mark 1, Long Branch, 1942.

    he markings tell the tale, friend.

    1942 is the year it was built; it was definitely used in World War Two.

    Number 4 Mark 1 is the type of ifle: a late-model improved Lee-Enfield rifle in .303 calibre wityh a 10-round magazine and generally a decent set of aperture sights. These can be very accurate and they will take just about any amount of abuse. In my opinion, the finest single bolt-action combat rifle ever made, bar none.

    Long Branch: It was made by Small Arms Limited, a Government-owned company, in their factory at Long Branch, Toronto, Ontario, Canadaicon. The plant turned out large numbers of the Number 4 Rifle for Brtish and Canadian use during the Second World War. Following the war, the plant worked on refurbishing quantities of used rifles, then worked on the final models until taken over by Canadian Arsenals Limited and production moved to another plant.

    The buttplate is either steel or a type of high-zinc brass termed Delta metal.

    In this country, these seem to be selling in the $400 range these days if they are in ice shape. Sorry I can't help further, but I really don't do a lot of buying these days; pension just doesn't stretch that far.

    Nice toy!
    .

+ Reply to Thread

Similar Threads

  1. Replies: 3
    Last Post: 08-27-2010, 12:37 PM
  2. Need help with G33/40 mauser ww2 ---any experts out there?
    By haddon1 in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 07-01-2010, 06:34 PM
  3. looking for em1 experts?
    By tator62 in forum M1/M2 Carbine
    Replies: 5
    Last Post: 03-22-2010, 11:41 PM
  4. Question to the experts
    By gunner in forum The Bren LMG (Light Machine Gun)
    Replies: 2
    Last Post: 12-21-2009, 03:52 PM
  5. One for the sniper experts
    By desporterizer in forum Milsurps General Discussion Forum
    Replies: 12
    Last Post: 02-19-2008, 07:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts