-
Legacy Member
martini enfield question
Not sure if this should be here or the Enfield forum so I thought I'd try both. I heard at the range on saturday, when I was bemoaning the lack of martini enfield's which have a decent bore, that the thread on the martni enfield action are identical to the SMLE, and that I should get a ME and add in and SMLE heavy barrel Ihave hanging around. Anyone tried this? anyone have any success? is it possible to get the look f teh ME back and fitthe wood to it and how does it shoot?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
11-07-2011 04:47 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Yes it will work. You will have to cut extractor relief and set the chamber deeper. Once in a while you will have to cut the shoulder back a little to get the sights to line up
-
-
FREE MEMBER
NO Posting or PM's Allowed
Unless you used a long Lee barrel, you won't be able to fit the wood or "get the look" back. However you can fit SMLE wood for the forearm without too much trouble. There was a very late emergency conversion along these lines and it is a quite popular project for those desiring a good Martini shooter in .303.