+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13

Thread: Bren facility at Enfield

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    10-31-2024
    Local Time
    11:56 PM

    Bren facility at Enfield

    Learned something interesting during the past weeks about the Bren production facility at Enfield. The Bren 'facility' at Enfield seems to have been in business from the start of production in 1937 until early in 1981 when the Bren facility shut down. Although this '81 date could be a bit earlier or later. There was pretty well continual Bren work between those dates although it is possible (I'd say VERY highly probably....) that there were short breaks in work and/or output.

    This included the manufacture of new Mk3 guns and parts, Conversion of 20,000 Mk2 to Mk2/1 spec and FTR of others in the 50's. Conversion of guns to L4 spec and later, FTR of worn out L4 guns. Conversion of others for foreign buyers. Manufacture and conversion of spare parts until Bren facility closed. Manufacture of any Bren parts that were NOT compatible with current production ceased after .303" gun production ceased.

    Also included in this was the refurbishment of parts such as bipods, butt slides etc etc for return to Ordnance as spare parts stockpiles. This is very interesting as an Armourer because you would occasionaly get through the Ordnance system a seemingly brand new, say bipod or piston/piston extension assembly that simply cannot be brand new. It's simple! The parts had been rebuilt/refurbished to new spec at Enfield and returned to Ord as spare parts.

    The Bren facility was occasionally the financial lifeline that Enfield needed
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 8 Members Say Thank You to Peter Laidler For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    Yesterday @ 02:24 PM
    Location
    out there
    Posts
    1,838
    Local Date
    10-31-2024
    Local Time
    04:56 PM
    2 questions:
    1. How late did Enfield continue manufacture of Mk3 Brens?
    2. Did Enfield ever "new build" an L4A2, ala the Indian 7.62mm IB (IMG 16GA)
    Last edited by Lee Enfield; 01-21-2015 at 12:10 PM.
    BSN from the Republic of Alberta

    http://www.cartridgecollectors.org/

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    Thread Starter
    New build L4 Brens, it depends on what you mean by new build. Starting from new made bodies? Then No. But starting with new made/unused Mk3 bodies held in stock, then yes. Waste not, Want not.

    Last new made Mk3 guns. BP or KevG. When were the last UE type serial numbers issued on Mk3 Brens?

  7. #4
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    Thread Starter
    Might as well tack this onto the end of this barely read tome.......... RFI/Indfian made or converted L4 guns

    Has anyone seen or acquired or heard of a nation using or having their Bren stocks converted to 7.62mm L4 spec at RFI during the mid 70's onwards? I have been shown a catalogue/brochure issued at one of the Middle Eastern Arms Expo's during this time and another very similar issued/published by the Indian Government announcing that RFI can offer this (7.62mm/L4) service to government agencies subject to approval agreements - presumably between goverrnments as opposed to any agreement with the RSAF who held the patent rights on certain aspects of the conversion!

    There it is. It seems as though the RFI L4 new build or converted guns were exported. But where to? Any ideas anyone. Wherever it was, they'd have been a LOT cheaper than a deal with RSAF Enfield. Cheaper............... Well, probably not of you were an '...emerging nation' (that usually means Africa somewhere.....) with their fingers in our overseas aid till!

    The same brochure also advertises the Sterling SMG's and RFI L1A1 rifles that they describe as '....favourably compatible with the licence built Commonwealth rifles'.... The L1A1's!

  8. The Following 4 Members Say Thank You to Peter Laidler For This Useful Post:


  9. #5
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    10-24-2024 @ 05:49 PM
    Posts
    1,807
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    The last Mk3s were 1961 and then the last 500 bodies were converted to L4 so those L4s made from new Mk3 bodies will be in the UE61 A10xxx to A14xxx range. It may also be remotely possible that an L4 may have 2 UE numbers, one as a late Mk3 (Barred out) and one as an L4A4.

    I've not seen or heard of any indian conversions done for foreign governements but I've seen the website offering them (It may still be there).

  10. Thank You to Brit plumber For This Useful Post:


  11. #6
    Advisory Panel Lee Enfield's Avatar
    Join Date
    Oct 2006
    Last On
    Yesterday @ 02:24 PM
    Location
    out there
    Posts
    1,838
    Local Date
    10-31-2024
    Local Time
    04:56 PM
    Quote Originally Posted by Peter Laidlericon View Post
    Might as well tack this onto the end of this barely read tome.......... RFI/Indfian made or converted L4 guns

    Has anyone seen or acquired or heard of a nation using or having their Bren stocks converted to 7.62mm L4 spec at RFI during the mid 70's onwards? I have been shown a catalogue/brochure issued at one of the Middle Eastern Arms Expo's during this time and another very similar issued/published by the Indian Government announcing that RFI can offer this (7.62mm/L4) service to government agencies subject to approval agreements - presumably between goverrnments as opposed to any agreement with the RSAF who held the patent rights on certain aspects of the conversion!

    There it is. It seems as though the RFI L4 new build or converted guns were exported. But where to? Any ideas anyone. Wherever it was, they'd have been a LOT cheaper than a deal with RSAF Enfield. Cheaper............... Well, probably not of you were an '...emerging nation' (that usually means Africa somewhere.....) with their fingers in our overseas aid till!

    The same brochure also advertises the Sterling SMG's and RFI L1A1 rifles that they describe as '....favourably compatible with the licence built Commonwealth rifles'.... The L1A1's!
    Interestingly a local collector has 2 Indian 7.62 Conversions, a IC (MkI converted to tangent sight and 7.62mm) and I believe the 2nd is a IB (Mk3 Bren manufactured as a 7.62mm), not requiring the magazine support conversion disks.
    BSN from the Republic of Alberta

    http://www.cartridgecollectors.org/

  12. The Following 2 Members Say Thank You to Lee Enfield For This Useful Post:


  13. #7
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    Thread Starter
    That would tend to suggest that RFI offered to convert ANY Mk of Bren gun to 7.62mm spec including the more difficult Mk1 guns as well as the simpler (?) Mk2's and 3's for other nations

  14. #8
    Legacy Member TactAdv's Avatar
    Join Date
    Apr 2014
    Last On
    09-20-2024 @ 09:06 PM
    Location
    NE Colorado, USA
    Posts
    237
    Real Name
    Thomas T. Hoel
    Local Date
    10-31-2024
    Local Time
    04:56 PM
    Peter, if I am not mistaken, I seem to recall at EUROSATORY a few years back, the Indian SAF was still advertising the availability of brand new L4's if ordered in suitable quantities.

    This was about 2008-09 as I recall. I have no idea if they actually did make them in recent memory, but they advertised availability right beside their current MAG58's.

    Just a data point.

    -TomH

  15. #9
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    10-20-2024 @ 05:01 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,569
    Real Name
    Peter Laidler
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    Thread Starter
    That's interesting. I suppose it's the same old thing that if you order enough, they'll tool-up. The old Bren, nice and nostalgic tjough it is, even in 7.62mm guise is well out of date against, dare I say it the cheap, cheerful but superior PKM.

    One of our WO's who was seconded to Ghana told us a few years ago how he tried and tried relentlessly to get them to get their Sterling (6,000 of 'em) and Brens sent back for refurbishment under the old nox extinct Crown Agents programme. But the offers from cheap new soviet/chicom agencies offering more for less, it was a lost battle!

    But back to RFI Brens. It looks like some nations did take up the offer.

  16. #10
    Legacy Member Brit plumber's Avatar
    Join Date
    Dec 2009
    Last On
    10-24-2024 @ 05:49 PM
    Posts
    1,807
    Local Date
    10-31-2024
    Local Time
    11:56 PM
    Ive got a 1A and a 1B but the 1C is quite a rare bird. I know of one in the Uk but that's it.

    In 2011 India still had on it's books over 1,000,000 Lee Enfield .303 rifles.

    These are the 2012 figures which make for interesting reading.

    Organization .303 rifles .410 muskets Modern rifles* Machine guns Sub-machine guns Handguns Unidentified types All small arms
    Army 305,000 ? 1,200,000 ? ? 250,000 750,000 2,500,000
    Other military ? ? ? ? ? ? 100,000 100,000
    Police 1,000,000 250,000 50,000 ? 100,000 300,000 ? 1,700,000
    Paramilitary 600,000 ? 300,000 50,000 200,000 100,000 ? 1,300,000
    Total 1,905,000 250,000 1,550,000 50,000 300,000 650,000 850,000 5,600,000

    I couldn't find the Indian State Arsemal web site that used to offer the LMG but I did find this info on the Sterling, 5000 a year in 2012, as recent as that!

    Sterling sub-machine gun
    Sub-machine guns are relatively rare
    in much of the world, used mostly for
    VIP protection and other niche roles.
    In India, sub-machine guns are often
    called carbines and appear to be the
    firearm of choice. The Britishicon-designed
    Sterling sub-machine gun was initially
    imported in the mid-1960s, with 32,536
    purchased outright (Thompson, 2012).2
    Indian domestic production began
    around that time at the IOF Kanpur
    plant (IOB, n.d.) Though production
    was probably higher before, it averaged
    5,000 annually as of 2012 (see Table 3).
    This suggests at least 400,000 units

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Soviet Mosin Refurb facility marks identified....
    By fernleaf in forum Soviet Bloc Rifles
    Replies: 5
    Last Post: 09-01-2014, 09:53 PM
  2. Mark 3 Bren 1959 Enfield - correct bipod
    By Pompey_Herman in forum The Bren LMG (Light Machine Gun)
    Replies: 8
    Last Post: 08-20-2013, 05:26 PM
  3. 1941 Enfield Mk1 Bren?
    By Badger in forum The Bren LMG (Light Machine Gun)
    Replies: 4
    Last Post: 06-10-2011, 11:02 AM
  4. Enfield made MkII Bren magazine well cover
    By peregrinvs in forum The Bren LMG (Light Machine Gun)
    Replies: 9
    Last Post: 08-30-2010, 05:32 PM
  5. Enfield Bren LMG MKI mixed with MKII help (warning - pic heavy)
    By AlexV in forum The Bren LMG (Light Machine Gun)
    Replies: 10
    Last Post: 06-18-2010, 07:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts