-
Legacy Member
280 ross chamber and cartridge dimensions
Does anyone have any drawings of the 280 ross chamber and cartridge?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
08-02-2019 10:27 AM
# ADS
Friends and Sponsors
-
Contributing Member
-
-
-
Legacy Member
Sorry nothing there. Did multiple searches even using 280 nitro express (Rimless) so if it is on the web some place I cannot find it. I have the bible but some of the numbers are a little blurry for cartridge dimensions. The book also doesn't show chamber dimensions.
This is a little clearer than the book. More generic measurements though.
Uploaded at Snapagogo.com
Last edited by altadiver; 08-02-2019 at 02:52 PM.
-
-
Legacy Member
Probably just end up using cerrosafe in the chamber and go from there.
-
-
Contributing Member
Try the Canadian Patent Office or maybe the U.S. Patent Office.
-
-
Contributing Member
-
Thank You to NORTHOF60 For This Useful Post:
-
Contributing Member
-
Thank You to NORTHOF60 For This Useful Post:
-
Legacy Member
Excellent! Just what I needed.
Do you have a source for the files you provided? I wouldn't mind purchasing a copy.
Found the website. Good info there for old calibers!
https://bobp.cip-bobp.org/en/tdcc_public
Last edited by altadiver; 08-02-2019 at 06:23 PM.
-
-
Contributing Member
I've always found Commission Internationale Permanente (CIP) very useful - and its free. The Sporting Arms and Ammunition Manufacturers' Institute (SAAMI) charges for the service.
-
-
Legacy Member
"...(SAAMI) charges for the service..." SAAMI specs are on-line for free. Click on 'Technical Information' then 'Cartridge and Chamber Drawings, then Rifle, etc. Opens as a .pdf. Right click and print.
The .280 Ross probably isn't there as that though. Might be as the .280 Nitro Express. Didn't look.
https://saami.org/specifications_and...tion/index.cfm
Spelling and Grammar count!
-
Thank You to Sunray For This Useful Post: