-
FREE MEMBER
NO Posting or PM's Allowed
Replacement firing pin on Historic Arms SA Bren?
From what I've read, looks like I've encountered a common problem. The firing pin broke on my Historic Arms LLC semi-auto Bren.
Are replacement pins available? I've had no luck searching for them online. Wiselite pins, yes, but haven't seen any for the HA.
Hate to see her rendered a paperweight (albeit a quite lovely paperweight) for want of a firing pin.
Thanks for any leads!
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
08-06-2016 02:50 AM
# ADS
Friends and Sponsors
-
Legacy Member
Have you tried contacting Len Savage directly?
-
-
-
Legacy Member
Here’s what a quick search came up with.
Historic Arms Llc
1486 Cherry Rd
Franklin GA 30217
(706) 675-0818
(706) 675-0287
If you can’t get one from Len, don’t worry. The firing pin is an easy part to make. Take the broken one you have to a good reputable gunsmith and have one made. Probably a good idea to take the gun and see if the gunsmith can figure out why it broke.
-
-
Legacy Member
How does the Historic Arms firing pin differ from the Wise Lite Arms?
This is the Wise Lite Arms firing pin. Bren Firing Pin
-
-
Legacy Member
Since they both use the original retaining pin in the bolt... the front halves are essentially the same. The HA pin's rear is a circular cross section of reduced diameter from the retaining pin area.
Where along the firing pin's length did the break occur?
-