+ Reply to Thread
Results 1 to 10 of 10

Thread: My first post here and info request

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    old_dood's Avatar
    Join Date
    Mar 2009
    Last On
    10-10-2011 @ 09:34 AM
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:23 PM

    My first post here and info request

    I've seen some recent posts concerning GB auctions and was wondering if it's appropriate to ask for advice on a particular gun. I know the basics such as dis assembly, low#/high#, researching build dates and markings but, after reading some recent comments about some GB items, I would surely be the type of person that would get ripped off buy buying a rifle that wasn't all it seemed to be.

    What I'm interested in is http://v4.beta.gunbroker.com/Auction...Item=125090851 The barrel date is consistent with the build date but I'm not too sure about the inspector stamp. Any advice would be appreciated. Sorry if I'm out of line.

    Al
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    75
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    10-31-2024
    Local Time
    04:23 PM
    The inspection stamp dates from the late 1930s and is that of Stanley P. Gibbs at Springfield Armory. From the finish, I would guess the rifle has been refinished at some point.

    As far as I know, it is fine to post questions or comments about an auction - it is not all right to use this forum (or any others) to "push" any item that you are selling on an auction site.

    (Badger - correct me if I'm wrong!!)
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    10-29-2024 @ 10:20 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,165
    Real Name
    chuck
    Local Date
    10-31-2024
    Local Time
    05:23 PM
    Rick is right, its foul play to pimp your stuff from an auction.
    but fair to ask about a rifle your thinking of buying.
    the rifle in question looks pretty nice, is DHT, right before NS was used, barrel date is right, stock has been replaced at one time. his opening price is about what the gun is worth resale, didnt see if he offeres a 3 day inspection, but thats normal practice.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    old_dood's Avatar
    Join Date
    Mar 2009
    Last On
    10-10-2011 @ 09:34 AM
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:23 PM
    Thread Starter
    thanks for the replies. Something I've noticed on various GB auctions is the relationship of the serial number to the "Model 1903" above it. Should the serial number always be centered on "Model 1903". It looks like, in every case where it isn't centered, the numbers that ARE centered would be a low serial number. Is it difficult to punch an extra number in the metal? I can't believe someone would misrepresent a rifle that way.

  7. #5
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    10-27-2024 @ 01:35 AM
    Location
    Sweet Home Alabama
    Posts
    1,091
    Local Date
    10-31-2024
    Local Time
    06:23 PM

    Serial numbering

    Quote Originally Posted by old_dood View Post
    thanks for the replies. Something I've noticed on various GB auctions is the relationship of the serial number to the "Model 1903" above it. Should the serial number always be centered on "Model 1903". It looks like, in every case where it isn't centered, the numbers that ARE centered would be a low serial number. Is it difficult to punch an extra number in the metal? I can't believe someone would misrepresent a rifle that way.
    In the few cases where I've paid attention, the serial number always appeared properly centered on the receiver.

    The serial number on the rifle in the auction appears fine.

    Hope this helps.

    J.B.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    PeteDavis's Avatar
    Join Date
    Mar 2009
    Last On
    05-16-2012 @ 08:26 PM
    Location
    Mountains of old Virginia
    Posts
    101
    Local Date
    10-31-2024
    Local Time
    07:23 PM
    Early 1920's service rifle, rare period. I'd like to have it even if it has been overhauled and swapped out. The metal and wood look nice. PD

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    old_dood's Avatar
    Join Date
    Mar 2009
    Last On
    10-10-2011 @ 09:34 AM
    Posts
    14
    Local Date
    10-31-2024
    Local Time
    07:23 PM
    Thread Starter
    the price exploded in the last 20 minutes. Oh well.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    Jim K's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2009 @ 03:41 PM
    Posts
    505
    Local Date
    10-31-2024
    Local Time
    07:23 PM
    The serial number should be centered, within the width of a serial number digit. For many years, it has been common for people trying to sell "low number" rifles to add a "1" at the front (left) of the serial number. When you see that "1" offset to the left, alarm bells should go off.

    Without getting (again!!!) into the LN, HN business, changing the number is not only fraud, it is illegal in itself and shows that the rifle is a fake, at least to that extent. But serial number fakery is rarely alone; usually other kinds of fraud (fake cartouche, fake finish, wrong stock) are seen on the same gun.

    Jim
    Last edited by Jim K; 03-29-2009 at 09:57 PM.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    irishsteve's Avatar
    Join Date
    Mar 2009
    Last On
    12-12-2009 @ 10:38 PM
    Posts
    78
    Local Date
    10-31-2024
    Local Time
    06:23 PM
    Thats the down side of asking for help,everyone in the shooting world reads these posts.Board members may be gentleman,but outsiders won"t even thank you for the tip.

  12. #10
    Advisory Panel
    Rick the Librarian's Avatar
    Join Date
    Nov 2008
    Last On
    04-09-2023 @ 08:59 PM
    Location
    NW Washington State
    Age
    75
    Posts
    2,301
    Real Name
    Rick Slater
    Local Date
    10-31-2024
    Local Time
    04:23 PM
    I agree with Irishsteve - that is a real problem in asking for guidance on a rifle for sale. If it is a good deal, it will be gobbled up. I remember a few months ago, I was bidding on a low numbered Rock Island on Gunbroker and someone decided to "congratulate" me with like 20 minutes left in the auction, giving the auction number and everything on the M1903 forum! Needless to say, I was outbid!

    Fortunately, it later turned out the rifle on GB had problems and I was glad I hadn't won.
    Last edited by Rick the Librarian; 03-29-2009 at 10:07 PM.
    People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.

    --George Orwell

+ Reply to Thread

Similar Threads

  1. Need info on BYF 43
    By RETDAWG in forum Mauser Rifles
    Replies: 2
    Last Post: 09-28-2009, 10:23 AM
  2. Request 1938 Ammo Identification
    By Harlan (Deceased) in forum Mauser Rifles
    Replies: 3
    Last Post: 03-23-2009, 04:35 PM
  3. Formal request to host reference file
    By LavaTech in forum M1/M2 Carbine
    Replies: 0
    Last Post: 03-02-2009, 11:03 AM
  4. Walther PP help request.........
    By ray48 in forum Milsurps General Discussion Forum
    Replies: 2
    Last Post: 01-18-2008, 11:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts