Still another Standard Products

**Bill Hollinger** · 12-23-2009 04:22 PM

No, the screw looks right but it also looks to be in much better condition than the swivel. It all looks good to me.

**Highly Recommended** · 12-23-2009 04:22 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**JBS** · 12-23-2009 04:33 PM

Respectfully suggest you do not BLO icon

, turpentine, or bees wax the stock until you repair the crack. The crack will wick these fluids making it more difficult for glue or cement to bite into the wood.

**dnikkor** · 12-23-2009 04:38 PM

Originally Posted by JBS

Respectfully suggest you do not BLO icon

, turpentine, or bees wax the stock until you repair the crack. The crack will wick these fluids making it more difficult for glue or cement to bite into the wood.

Oops. I was wondering about that and should have checked before jumping. I guess I will wait awhile before attempting to repair the crack since it is too late now.

**JBS** · 12-23-2009 04:55 PM

Sorry I did not see your post sooner friend. When it comes time to make the patch try to wick some Acetone into the crack for a couple days before you use your glue.

**dnikkor** · 12-23-2009 05:48 PM

Originally Posted by JBS

Sorry I did not see your post sooner friend. When it comes time to make the patch try to wick some Acetone into the crack for a couple days before you use your glue.

Any suggestions for the gluing process? Thanks again, Dave

**imarangemaster** · 12-23-2009 09:33 PM

Originally Posted by JBS

Respectfully suggest you do not BLO icon

, turpentine, or bees wax the stock until you repair the crack. The crack will wick these fluids making it more difficult for glue or cement to bite into the wood.

I did not find the crack in my Inland CMP icon

until I was doing the second round BLO icon

treatments yesterday. It is 5 inches long running from mag well towards nose. I contacted CMP and they will swap it out for me.

Thread: Still another Standard Products

Thread Tools

Search Thread

Display

Thank You to Bill Hollinger For This Useful Post:

Similar Threads

Questions on a Standard Products

Standard Products M1 - value?

Hi Standard

Standard Products Marking?

Hi-Standard k-120 riot

Tags for this Thread

Posting Permissions