+ Reply to Thread
Results 1 to 6 of 6

Thread: 1903a3 Rear sight question

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Boom Stick's Avatar
    Join Date
    Aug 2011
    Last On
    03-18-2012 @ 04:30 PM
    Location
    New York
    Posts
    3
    Local Date
    05-20-2024
    Local Time
    08:34 PM

    1903a3 Rear sight question

    I just picked up my 03a3 barreled action from my ffl this afternoon. All I need for a complete rifle will be a trigger guard and two screws. I have a question regarding the audible clicks on the rear sight: there are none. I can feel the faintest click while turning the windage knob. Very faint, almost not there. The windage knob has no resistance to it and turns much easier than I would have expected. Today was the first time I have handled this type of rifle so it makes me uneasy. Every other us military rifle I have handled have had the exact opposite as far as ease of movement and audible clicks on windage. What is it and what do I do to remedy this????? Thanks
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Jinx's Avatar
    Join Date
    Apr 2011
    Last On
    08-24-2013 @ 09:49 AM
    Location
    Sav. Ga.
    Posts
    23
    Local Date
    05-20-2024
    Local Time
    08:34 PM
    Windage spring missing or the windage assm needs tightened. Please refer to your TM9-1270. (I think)
    Last edited by Jinx; 08-31-2011 at 10:20 AM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member emmagee1917's Avatar
    Join Date
    Aug 2009
    Last On
    11-27-2022 @ 11:10 AM
    Location
    Yuma , Arizona
    Posts
    1,402
    Local Date
    05-20-2024
    Local Time
    05:34 PM
    The detent ball and spring found under the windage knob is missing , broke , or just gummed up. Might try soaking it in brake or carb cleaner to de-gunk it , otherwise you'll have to take it apart and look. Beware as they are very small , IIRC , and easy to loose.
    Chris

  6. #4
    Contributing Member Sarge1998's Avatar
    Join Date
    May 2010
    Last On
    03-13-2024 @ 08:13 PM
    Location
    Northern Illinois
    Posts
    577
    Real Name
    Joseph Budde
    Local Date
    05-20-2024
    Local Time
    07:34 PM

  7. #5
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    05-13-2024 @ 12:48 AM
    Location
    Sweet Home Alabama
    Posts
    1,066
    Local Date
    05-20-2024
    Local Time
    07:34 PM
    The most common cause for an '03-A3 rear sight lacking windage detents is bent rear sight base ears. The windage knob has a thin, flat, dimpled spring behind it. The dimple in the spring provides the detents. If the ears are bent inward slightly, it relieves the pressure against the spring and causes loss of detents. The simple solution is to bend the ears back out to the vertical position.

    Hope this helps.

    J.B.

  8. #6
    Legacy Member emmagee1917's Avatar
    Join Date
    Aug 2009
    Last On
    11-27-2022 @ 11:10 AM
    Location
    Yuma , Arizona
    Posts
    1,402
    Local Date
    05-20-2024
    Local Time
    05:34 PM
    Aw crud. I was thinking of another rear sight. J.B. 's correct , there is a shim washer with two "ears" with dimples to engauge the four detents in the rear of the windage screw. Bent ears would pull them apart. Sorry for the bad intell. You lose things when you get older , I think I miss my mind the most.
    Chris

+ Reply to Thread

Similar Threads

  1. 1903A3 Rear sight base removal
    By sniper188 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 7
    Last Post: 05-11-2010, 04:31 PM
  2. Gew 98 rear sight question
    By jisii in forum Mauser Rifles
    Replies: 1
    Last Post: 09-16-2009, 10:37 PM
  3. 1903a3 front sight question
    By smitherj86 in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 04-09-2009, 11:05 AM
  4. ID of 1903A3 rear sight
    By Mike in NC in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 03-25-2009, 12:34 PM
  5. 1903A3 &1903A4 Rear Sight Witness Marks?
    By chuck in idaho in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 1
    Last Post: 03-23-2009, 08:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts