-
Legacy Member
Working on this one for me
This HI low wood has a bad break that I'm going to repair. When I'm done it will never break in the same place.
These pics are after being cleaned and bleached. I have wedges inside holding it apart to dry.
After it dries I will glue, clamp and put in two pins that won't be seen when the handgaurd is on. The breaks should not show when it's done.
I will work on this one in between working on others and add pics as I progress.
In the spirit of collecting, everyone have a great weekend.....Frank
Attachment 26581Attachment 26582
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
The Following 5 Members Say Thank You to frankderrico For This Useful Post:
-
09-04-2011 05:49 PM
# ADS
Friends and Sponsors
-
Legacy Member
Looks a little bit like the one you fixed for me Frank! except that one is both sides.
-
-
-
Legacy Member
Hi Rusty, yes this one is alot like you Q-RMC except the break runs through on both sides. I'm going to put threaded pins in this one behind the band spring. I'll keep adding pics as I work on it.
Have a great labor day.....Frank
Last edited by frankderrico; 09-06-2011 at 07:26 AM.
-
-
Senior Moderator
(Milsurp Forums)
I look forward to seeing the end result. Have a great holiday back atchu!
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-
Thank You to Bill Hollinger For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
I know from personal experience the it will turn out nice!!
Dave
-
Legacy Member
Well it got a little rainy here today so this is what I worked on. It's done and ready to go back into service. After the last fill and oiling the crack on the right is almost invisable, looks like the one on the left.
Hope everyone had a great weekend.....Frank
Attachment 26970Attachment 26968Attachment 26967
-
Thank You to frankderrico For This Useful Post:
-
Legacy Member
Looks Great Frank, another one saved
-
Thank You to Rustship For This Useful Post:
-
Legacy Member
Rusty thanks, that's the mission!!
Bless you guy's in Texas.
Hope you're out of the fire zone.....frank
-
-
Senior Moderator
(Milsurp Forums)
Frankie, you are amazing! Wonderful work!
Bill Hollinger
"We're surrounded, that simplifies our problem!"
-
Thank You to Bill Hollinger For This Useful Post: