Remington 513 firing pin overall length or protrusion specs?

[mac1911]

Anyone have a link to the specs for these rifles. looking for firing pin spacs or complete "blue print" specs.

thank you

[WarPig1976]

I have a 510 but the bolts are interchangeable. I'll measure for you, but the catch is it may take a few days to get it being the holiday weekend.

[WarPig1976]

Ok, I get 25 thou from the bolt face to the tip of the pin. At least one extractor had to removed to get an accurate measurement. FYI, the total from the bolt face to the front edge of the body was 33 thou on mine so 7 thou from flush.