+ Reply to Thread
Results 1 to 3 of 3

Thread: Mauser Es340B and fitting of Lyman Super Targetspot scope help needed

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel Nigel's Avatar
    Join Date
    May 2008
    Last On
    Yesterday @ 07:19 PM
    United Kingdom
    Local Date
    Local Time
    07:13 PM

    Mauser Es340B and fitting of Lyman Super Targetspot scope help needed

    I'd like to fit a Lyman Super Targetspot scope to a .22 Mauser Es340B. I don't want to alter the rifle so I wondered if anyone has come across adapters that will fit the grooves and then mount a Lyman. I might need to have a rail made up so that I can achieve the 7.2" between mounts so that the scope will adjust in 1/4 min clicks. Has anyone else tried to solve this problem? I plan to shoot the rifle at 100 and 200 yards so may need to create a slope on the rail so that I don't run out of elevation. There are some long standing .22 competitions in the UKicon that go back to 500 yards for a .22 (the equivalent to 1,200 yards with a 7.62x51).

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    All Threads
    No Drill-Tap scope mounts for Mosin Nagant, Mauser K98K, Yugo M48, Swedish M96 and M38, Swiss K31, K11, 1911 and more! Bringing mil-surplus rifles to modern standard without damaging historical values! We specialise in military utensils and artefacts such as helmets, daggers, medals and badges, etc.  The on-line store is intended for personal browsing and searching of collecting objects. All items are provided historical value only and can be used for home collection or other purposes except of fascism, Nazism or other extremism manifestation or its propaganda. LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles We pride ourselves on being the new lowest price listing service, and the simplest to use. If you need to buy or sell collectible firearms or any firearm in your legal possession, then this is the place for you. If you’re a big collector clearing house, or other seller that could benefit from a Premium seller account, then we can also support you here at Gunonline.com. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

  3. #2
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    Today @ 08:37 AM
    Southern Corner Western Australia
    Local Date
    Local Time
    08:13 AM
    Real Name
    You could source scope rings with the appropriate width claws to match the dovetail grooves just measure the grooves on top of the receiver and go from there.
    Not sure on the 7.2" mounting so the scope will adjust in 1/4 minute clicks, does not matter really what you mount the scope in it is always going to have the same elevation/windage click measurement as it left the factory regardless and if some one said it alters a scopes measurement by mounting it then they are on some serious stuff that they need to get off of.

    I think 500 yds with a .22 rimfire is ambitious but here is an interesting article on such endeavours;
    Long Ultra Long Range Ballistics of the .22 Long Rifle Cartridge - The Long Range Rim Fire Club

  4. Thank You to CINDERS For This Useful Post:

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Really Senior Member Herschel's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 06:25 PM
    Local Date
    Local Time
    08:13 PM
    As understand the questiion, you would need a base to clamp on the dovetails then attach a bar to it long enough to space the scope blocks 7.2 inches apart. Scope mounting blocks are being made so
    some could be made to mount the scope high enough to clear the bolt handle and for the bell of the scope to clear the barrel. I don't believe Cinders understands how the external adjustment rings work
    on the Lyman Super Target Spot scope. My suggestion would work but would not provide a neat looking scope mount.

+ Reply to Thread

Similar Threads

  1. Help needed with 03A4 with Lyman Scope - Post Retical
    By Brightonknight in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 18
    Last Post: 01-01-2016, 04:54 PM
  2. Lyman Super Spot 20x scope
    By catman in forum Appraisals, Fakery, Dispute Resolution & Mediation Forum
    Replies: 2
    Last Post: 06-20-2014, 08:44 PM
  3. Lyman Jr Targetspot
    By Calfed in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 04-17-2013, 07:36 PM
  4. Quick advice needed - what tools needed for fitting forends
    By newcastle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-17-2011, 04:09 PM
  5. Info needed regarding scope rings for Lyman / Unertl bases
    By coolhandluke in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 1
    Last Post: 11-28-2010, 08:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts