+ Reply to Thread
Results 1 to 2 of 2

Thread: Trapdoor Cadet advice?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member flintlocke's Avatar
    Join Date
    Feb 2019
    Last On
    02-04-2019 @ 11:56 AM
    Location
    Siskiyou Co. Calif
    Posts
    3
    Local Date
    07-06-2020
    Local Time
    07:27 PM
    Real Name
    Paul Halvorseth

    Trapdoor Cadet advice?

    I acquired this Cadet model and have found a smokeless load that will work well (for my standards) , putting 5 in 2" pretty consistently. This rifle is equipped with a Buffington, "R" sight and has a very good bore. What I would like to know, is the original arsenal load for Cadet rifles the 500 gr standard load or was it the 405 gr carbine load? Is there any data on the ballistics on the loads this rifle was intended to be used with? My intent is to see what I can do with it at mid ranges. Luckily, I have my own clanger range of 10 targets out to 700, not so lucky, it is in steep brushy terrain. Assuming the sights were calibrated to the original ammo (big if)....I could attempt to clone the load to match the sight graduations, and do a little homework with ballistics programs....eventually using the sight more or less as it was intended. It may be a fools errand. I might have to borrow someone's alfalfa field and work out to 700 marking the sight as I go. Any input will be welcome, thanks, Paul
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
     

  3. #2
    Advisory Panel Dick Hosmer's Avatar
    Join Date
    Mar 2009
    Last On
    05-24-2020 @ 02:37 PM
    Location
    Northern California
    Posts
    86
    Local Date
    07-06-2020
    Local Time
    08:27 PM
    Real Name
    Dick Hosmer
    Unfortunately, I cannot answer your question as to what loading to use, but, whatever you do, I would NOT mark the sights! It will be easy enough to keep a notebook. It was intended that the lighter carbine load be used in the cadets, but no one has ever mentioned a difference in the "R" sights to accomodate this. Some have suggested that the front sight height may have been made different to achieve the purpose, but that has apparently not been researched either. My thought would be that the cadet arms were utilized more for drill and learning the manual of arms than for long range shooting. I SUSPECT that the sight issue may have been only marginally addressed, if at all. There are tables of trajectory in the original manuals, which have themselves been reprinted. That may prove helpful.


  4. Avoid Ads - Become a Contributing Member - Click HERE
+ Reply to Thread

Similar Threads

  1. I could use a bit of Trapdoor advice...
    By jrhead75 in forum Other U.S. Service Rifles
    Replies: 7
    Last Post: 12-04-2017, 04:22 PM
  2. 1884 Trapdoor Cadet Restoration
    By lemmonhead in forum The Restorer's Corner
    Replies: 12
    Last Post: 04-21-2017, 01:22 PM
  3. Difference in standard and cadet trapdoor Springfields.
    By Anzac15 in forum Other U.S. Service Rifles
    Replies: 4
    Last Post: 10-10-2013, 08:13 AM
  4. M1884 Springfield Trapdoor Need advice
    By chad188 in forum Other U.S. Service Rifles
    Replies: 3
    Last Post: 10-01-2012, 11:27 PM
  5. My new cadet
    By RangeRover in forum The Ross Rifle Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 12-25-2011, 02:09 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts