what do you guys think of the Hornady beam scale?

Is it actually a "razor blade" type or does it use an actual steel PIN to let the beam arm move?

I hate hate hate hate knife blade/razor blade beams. At least the one by LEE.

funny story on that one, the scale base has extra slots in it caused from manufacturing, and the razor blade in mine has a burr. If I don't take 10-15 minutes to make sure it gets into the RIGHT notch in the base, the beam will need 5 grains of more powder to balance out.

ie 10 grain setting, will now end up being 15 grains actual
Information
Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.