+ Reply to Thread
Results 1 to 6 of 6

Thread: Front sight problem

Click here to increase the font size Click here to reduce the font size
  1. #1
    Member RayRoyboy's Avatar
    Join Date
    Sep 2021
    Last On
    09-14-2021 @ 10:55 AM
    Location
    Cheyenne, Wy
    Age
    66
    Posts
    4
    Local Date
    09-17-2021
    Local Time
    11:18 AM
    Real Name
    Ray Hallett

    Front sight problem

    Hello everyone, I own a 1896 Kragicon rifle cut down to a carbine. I picked up the gun recently from an acquaintance after it had been in a fire and been left to rust. It looked hopeless but I got it cheap and decided to see if I could bring it back from the grave. Iíve cleaned it up and it does shoot. It had a junky old rear sight so I bought an 1898 rear sight for it. The front sight is a 1903 (Iíve been told) and now with an original rear sight the front sight needs to be raised. I am looking for advise on the best way to do this job. I enjoy shooting it and would like to actually shoot something with it.the front sight has a 7/16 dovetail. Any and all advise is appreciated. I have included a couple of pics. Ray
    Attached Thumbnails Click image for larger version

Name:	71F0AE62-4DA6-428D-988A-72D70C9F11B7.jpeg‎
Views:	33
Size:	419.6 KB
ID:	120052   Click image for larger version

Name:	884C9497-7A68-49C4-B622-3647E62A55DF.jpeg‎
Views:	32
Size:	529.2 KB
ID:	120053  

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    Banner AD Space Available - Click HERE to Inquire LIMITED TIME OFFER FROM THE AMERICAN GUNSMITHING INSTITUTE: Get Immediate Online Access To AGI's NEW Armorer's Course for Glock Pistols, Covering Every Generation of Glocks, Including the Latest Model 42/43 and Double Stack Pistols for ONLY $7.00! Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Chuck in Denver ... Buy-Sell-Trade .. Guns, Cars Motorcycles Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Member RayRoyboy's Avatar
    Join Date
    Sep 2021
    Last On
    09-14-2021 @ 10:55 AM
    Location
    Cheyenne, Wy
    Age
    66
    Posts
    4
    Local Date
    09-17-2021
    Local Time
    11:18 AM
    Real Name
    Ray Hallett
    Thread Starter

    Krag front sight problems

    Hello everyone, I own a 1896 Kragicon that was cut down to carbine length. The original rear sight was gone so I bought a 1898 rear sight. Iíve been told the front sight is from a 1903. Anyway the front sight needs to be raised and I am looking for advise on the best way to do it. I have included a couple of photos. Any and all advise is appreciated. Thanks. Ray
    Attached Thumbnails Click image for larger version

Name:	255DCFC6-CBD4-4D43-8767-944A38C52221.jpeg‎
Views:	30
Size:	529.2 KB
ID:	120054   Click image for larger version

Name:	CA51F07F-AB0B-45CC-8F6F-9B1B70B5B9E5.jpeg‎
Views:	28
Size:	419.6 KB
ID:	120055  

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member ssgross's Avatar
    Join Date
    Jan 2020
    Last On
    Today @ 09:28 AM
    Location
    Virginia Swamp
    Posts
    789
    Local Date
    09-17-2021
    Local Time
    01:18 PM
    Quote Originally Posted by RayRoyboy View Post
    front sight needs to be raised
    Do you have the rest of the front sight? if not, they are cheap. I am assuming you mean you need a taller blade? There are many different 1903 standard blade heights. If one of iis then not high enough, go the make one by hand. SS Firearms sells replacement (krag) blades. They sell a large square one https://www.ssfirearms.com/proddetail.asp?prod=K527A. The blade will be slightly thicker than the 1903 one, but just fit by rubbing it on a stone - like one you would sharpen something on. In fact, it's too wide even for their replacement krag base and must be carefully stoned to to the correct thickness ...ask how I know. Shape it to your desired dimensions

  6. #4
    Member RayRoyboy's Avatar
    Join Date
    Sep 2021
    Last On
    09-14-2021 @ 10:55 AM
    Location
    Cheyenne, Wy
    Age
    66
    Posts
    4
    Local Date
    09-17-2021
    Local Time
    11:18 AM
    Real Name
    Ray Hallett
    Thread Starter
    SSGROSS, thanks for replying. I have the top of the sight but it’s too short. I am hoping to find a base that will slide into the 7/16 dovetail on the gun that will accept a blade I can cut down but I can’t find one in the wide dovetail. Any other solution is ok too. I will look at eBay to see if I can find a tall 1903 sight. Thanks, Ray

  7. #5
    Really Senior Member mark1's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 12:38 PM
    Location
    Heading for Florida
    Posts
    330
    Local Date
    09-17-2021
    Local Time
    11:18 AM
    You can remove the sight from the top portion. Than get a piece of metal that is the correct thickness and make your own sight. Any sheet metal or welding shop should have a piece of scrap they could give you. That way you can start with a tall sight and slowly file it down.

  8. #6
    Contributing Member ssgross's Avatar
    Join Date
    Jan 2020
    Last On
    Today @ 09:28 AM
    Location
    Virginia Swamp
    Posts
    789
    Local Date
    09-17-2021
    Local Time
    01:18 PM
    Quote Originally Posted by mark1 View Post
    That way you can start with a tall sight and slowly file it down.
    What I was thinking...but he needs the other part of the base.
    To my knowledge, only one size front sight dovetail was ever made, even though some are tighter/looser than others. I had one that was pretty loose. I squeezed it in a bench vise with hard plastic jaw pads.
    If you get one that is loose on your sight, you can do as I did, or peen it, or drop a tiny shot in the hole before the set screw....all of these I saw here
    http://forums.thecmp.org/showthread.php?t=150087
    I did the latter solution first, worked fine but after 3 months I got tired of seeing the gap and squeezed it.



    When you purchase the rest of your sight, don't forget to buy the set screw too!

    I found a reference to the various issued sight blade height:
    A .537
    B .522
    C .507
    D .492
    E .477

    Also the pin hole is not in the same place for -03 and -03A3 blades. you want an 03 A blade you can file down to whatever height you like. If that doesn't work, you can make your own as suggested.

+ Reply to Thread

Similar Threads

  1. Problem Removing Front Sight Assembly
    By Albayo in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 6
    Last Post: 07-14-2013, 11:52 PM
  2. Beautiful type I with odd front sight problem..
    By Old Joe in forum Japanese Rifles
    Replies: 5
    Last Post: 01-21-2012, 06:59 PM
  3. Innovative Industries NM front sight and general front sight question
    By onlycrimson in forum M1 Garand/M14/M1A Rifles
    Replies: 5
    Last Post: 04-24-2011, 11:43 AM
  4. Front sight problem
    By Pyno&dyno in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 37
    Last Post: 04-08-2010, 12:42 AM
  5. New 1917--front sight problem
    By Calfed in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 1
    Last Post: 08-13-2009, 07:44 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts