+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 23

Thread: which are you

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    06-30-2024 @ 07:09 PM
    Location
    WV
    Posts
    173
    Local Date
    10-11-2024
    Local Time
    08:11 PM

    which are you

    most avid .22 guys fall in one of two camps ,10/22 guy or model 60 guy , im all about the model 60

    have a gen 2 and a stainless gen 3 , a few years ago the stock on my gen 3 split at the wrist , i found a old Gen 1 Squirrel stock , it took some inletting , and a gentel refinish but i put the gen 3 in the old gen 1 stock
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Contributing Member usabaker's Avatar
    Join Date
    May 2017
    Last On
    Today @ 06:09 PM
    Location
    San Deigo, CA
    Posts
    1,769
    Real Name
    Bill Baker
    Local Date
    10-11-2024
    Local Time
    05:11 PM
    Quote Originally Posted by micmacman View Post
    most avid .22 guys fall in one of two camps ,10/22 guy or model 60 guy
    Guess i'm the odd-ball. I fall into the Remington Model 12 and 51X series .22 rifles. Have four 10/22 but they are not my favorites
    Veteran US Navy Seabees - US Army Corps of Engineers - American Legion Post 0867
    " Only two defining forces have offered to die for me. 1.) Jesus Christ 2.) The American G.I. "One died for your soul, the other for your freedom! "

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 03:16 PM
    Location
    Victoria BC
    Posts
    30,354
    Real Name
    Jim
    Local Date
    10-11-2024
    Local Time
    05:11 PM
    I've been all of them. I had to try everyone's offering once. I started with Remington 34 at 15 years old and then went through the Remington pumps, Winchester pumps, Browning and FN pumps, the Remington semi autos, the Lee Enfield training rifles and several of the Remington Nylons and the CBC variant. I had most of the common .22 semis including the Savage 87a and the nice Remington 550. I've had several Ruger 10/22 and a couple of the Browning Buckmark rifles...have one presently. I've been through the lever .22s like the 94/22 and the little Henry H001. The Henry was amongst the MOST accurate little rifles...the 94/22 was SO FAST I had to sell it or go broke. I now mostly shoot my CZ457 varmint with Turkishicon walnut stock and the Browning Buckmark rifle. Both have optics and my little Remington is iron sights. I have to scop it so it can play again. The CZ457 is about as accurate as you could want. I just shoot a 2" gong now at 100m for entertainment...bench rest of course.
    Regards, Jim

  6. The Following 3 Members Say Thank You to browningautorifle For This Useful Post:


  7. #4
    Contributing Member Low & Slow's Avatar
    Join Date
    May 2015
    Last On
    Today @ 12:53 PM
    Location
    colorado usa
    Posts
    400
    Local Date
    10-11-2024
    Local Time
    06:11 PM
    I've got a 10-22 but can't pry it out of the niece's hands. I wind up with the 62A, and am happy as a clam.

  8. The Following 2 Members Say Thank You to Low & Slow For This Useful Post:


  9. #5
    Contributing Member Sapper740's Avatar
    Join Date
    Jul 2022
    Last On
    Today @ 05:06 PM
    Location
    Texas
    Posts
    757
    Local Date
    10-11-2024
    Local Time
    07:11 PM
    I guess I'm an oddball too. My favorite .22 is a Lee Enfield No.2 MkIV* made in 1915. I love accurate rifles and this is the most accurate RF rifle I've ever owned. The 50 yd target picture I've posted is living proof.
    Attached Thumbnails Click image for larger version

Name:	No.2 pic 1.jpg‎
Views:	235
Size:	1.05 MB
ID:	131718  

  10. #6
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Today @ 01:34 PM
    Location
    long island, ny
    Posts
    622
    Real Name
    Bill
    Local Date
    10-11-2024
    Local Time
    08:11 PM
    We have 3 10/22's and 1 60 in the family. Nobody likes the 60, it seems cheap and low quality compared to the 10/22's. Flimsy mags that seldom empty without help, a thin cheap stock with useless and ugly pressed in checkering and no screws stay tight in use. It may just be that one made in the early 80's but because of all these reasons it hasn't been out of the safe since the 90's.
    Of course I'm not one to talk because as a teen I had a Squires-Bingham AK22. All the inaccuracy built into an AK in a 22lr. It did have 32 round mags and was lots of fun while it was alive but it literally shot itself to pieces in roughly 10 years. There are still pieces of it on the range somewhere never to be found. The 10/22's that were older than the AK22 are still working fine.

  11. #7
    Contributing Member micmacman's Avatar
    Join Date
    Apr 2021
    Last On
    06-30-2024 @ 07:09 PM
    Location
    WV
    Posts
    173
    Local Date
    10-11-2024
    Local Time
    08:11 PM
    Thread Starter
    Quote Originally Posted by oldfoneguy View Post
    We have 3 10/22's and 1 60 in the family. Nobody likes the 60, it seems cheap and low quality compared to the 10/22's. Flimsy mags that seldom empty without help, a thin cheap stock with useless and ugly pressed in checkering and no screws stay tight in use. It may just be that one made in the early 80's but because of all these reasons it hasn't been out of the safe since the 90's.
    Of course I'm not one to talk because as a teen I had a Squires-Bingham AK22. All the inaccuracy built into an AK in a 22lr. It did have 32 round mags and was lots of fun while it was alive but it literally shot itself to pieces in roughly 10 years. There are still pieces of it on the range somewhere never to be found. The 10/22's that were older than the AK22 are still working fine.
    yu are clearly thinking of a different rifle , the Marlin Model 60 is a tube fed and is arguably one of the most reliable semi auto .22 rifles ever , i owned 10/22 , i kept it for like a year and gave it to my nephew , it just wasnt for me , 10/22 is great if you want to play Barbi dress up with it because they of all the available after market parts , but for the extra money that a pain jane standard 10/22 costs , it makes me yawn

  12. Thank You to micmacman For This Useful Post:


  13. #8
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Today @ 01:34 PM
    Location
    long island, ny
    Posts
    622
    Real Name
    Bill
    Local Date
    10-11-2024
    Local Time
    08:11 PM
    Quote Originally Posted by micmacman View Post
    yu are clearly thinking of a different rifle , the Marlin Model 60 is a tube fed and is arguably one of the most reliable semi auto .22 rifles ever , i owned 10/22 , i kept it for like a year and gave it to my nephew , it just wasnt for me , 10/22 is great if you want to play Barbi dress up with it because they of all the available after market parts , but for the extra money that a pain jane standard 10/22 costs , it makes me yawn
    I was wrong it is an older Marlin model 70 which is the same basic rifle with flimsy detachable magazines and it is still a piece of crap.

    Obviously Barbie doll dress up is high on your list of daily activities but I have no need for it as I own all the real firearms the dress up kits are designed to mimic. All 3 10/22's are as they came out of the box with the exception of one having Weaver base and rings with a Barska 3x9 scope as a nod to age. 17 new shooters have learned the basics on one of the 3 of these rifles and all are avid and excellent shooters today each with their own 10/22's as part of their collections.
    What could be more boring, slow and inefficient than a tube magazine 22? I can't stop yawning thinking about them.

  14. #9
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 03:16 PM
    Location
    Victoria BC
    Posts
    30,354
    Real Name
    Jim
    Local Date
    10-11-2024
    Local Time
    05:11 PM
    Quote Originally Posted by oldfoneguy View Post
    I had a Squires-Bingham AK22.
    Quote Originally Posted by oldfoneguy View Post
    it literally shot itself to pieces in roughly 10 years. There are still pieces of it on the range somewhere
    I had a Squires Bingham model16, sort of looked like an AR...for a minute. Same thing happened to it. I thought I was alone in that way. It never worked right for the original owner and when it failed me I removed the mag for resale and tossed it downrange, shot it to bits with an L1A1. I had forgotten that.
    Regards, Jim

  15. #10
    Legacy Member oldfoneguy's Avatar
    Join Date
    Oct 2015
    Last On
    Today @ 01:34 PM
    Location
    long island, ny
    Posts
    622
    Real Name
    Bill
    Local Date
    10-11-2024
    Local Time
    08:11 PM
    Quote Originally Posted by browningautorifleicon View Post
    I had a Squires Bingham model16, sort of looked like an AR...for a minute. Same thing happened to it. I thought I was alone in that way. It never worked right for the original owner and when it failed me I removed the mag for resale and tossed it downrange, shot it to bits with an L1A1. I had forgotten that.
    Jim I didn't realize at the time but the receiver was cast pot metal with a sheet metal cover. Lived and learned since then. After about 8 years the barrel could visibility move up and down. With the last shot the barrel fell out, the receiver cover flew off and the top of the block that held the barrel went flying in multiple directions. Back in the late 70's I paid $86 plus tax for it. I sold all the parts except the receiver individually on gunbroker roughly 20 years afterward and netted $486, the 32 rounders brought the most money. Who knew these things had such a following.

+ Reply to Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts