Tele. Attachment Headgear Box Repair

[Flying10uk]

I purchased this headphone storage box on eBay not realising that the bottom 2 1/2" had been removed meaning that it wasn't tall enough to store headphones in. After reaching a settlement with the vendor over the matter, the only way to rectify was to replace the missing wood with new sourced from a box that was made of wood of the correct thickness. I wanted this box for it's original purpose, for storing a pair of WW2 headphones.

The first pic is of the box as received reduced in height by 2 1/2" at some point in the past. The 2nd pic is of the box with a pair of headphones in showing that the lid won't close. The 3rd pic is a comparison pic with another unaltered box in original condition.

Pic 4 is the new replacement wood cut with joints cut.

Pics 5 and 6 are of the replacement wood with the joints cut and assembled, unglued, and placed against the bottom of the box to check for size.

The last 3 pics show the new wood clamped and glued in place. The new wood has to be carefully aligned with the old before the glue dries.

The replacement wood was cut fractionally oversize to be sanded down to size once all wood has been glued in place.

The longest sections were glued and doweled to the existing wood using hand cut 7/32" oak dowels. The end sections are un-doweled because it is not possible to fit and dowel them with the long replacement sides already in place.