2 IP trigger housings to compare

**painter777** · 02-18-2010 07:12 PM

Here's a link to a IP trigger housing on GB.
M1 icon

CARBINE PARTS - Trigger Housing + Slide IP : Other at GunBroker.com

Here's another,
M1 Carbine Trigger Housing marked "IP" : Other at GunBroker.com

Besides the added lube/drain hole on the 2nd one............
Can anyone see anything different between the 2?

Charlie-painter777

Information

Warning: This is a relatively older thread
This discussion is older than 360 days. Some information contained in it may no longer be current.

**Highly Recommended** · 02-18-2010 07:12 PM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**Tired Retired** · 02-18-2010 07:54 PM

Oooo! Ooooo! Pick me! Pick me! I Know! I Know!!!

The one from Modesto seems to have extra machine marks on the rear part of the right side - where the "IP" stamp is... Almost like someone had machined it and re-stamped it... Need a set of Calipers to check, but the machine marks are visible and the area seems to have been thinned down and refrinished
in the picture...

Now, do I get to got to the front the of class or get a free pint of BLO icon

for refinishing stocks????

**Curt** · 02-18-2010 08:19 PM

One is in California is that the problem?

**Hooks** · 02-18-2010 09:05 PM

Small hole behind mag rel on left side not on the one from Cal.

Attachment 10439

**DaveHH** · 02-18-2010 10:46 PM

this is theft just the same as putting a gun to someone's head. Imagine what an absolute jerk this guy must be? Smiles as he steals your money.

**Tired Retired** · 02-18-2010 11:53 PM

I actually believe that it meets the legal elements of fraud or possibly forgery... selling a forged item with the intent to mislead a purchaser of its identify and/or value... if he was attempting to sell a forged DiVinci painting, he would be going direct to jail once the forgery was proven... but I don't know enough about the collecting business to even make a complaint to law enforcement... being across state lines does make it a Federal case (if it met their dollar value threshold for prosecution)... just my two cents....

**Mikey51** · 02-19-2010 01:48 AM

I'll email you Charlie with a correct pic. Send it to the good guys. That stuff is just so fraudulent.... get him locked up. Mike. N.Z.

**imarangemaster** · 02-19-2010 06:21 AM

And, they are slippery and only say that they are "IP Marked" not that they were made by Irwin Pedersen. It is only implied. It is still fraud and theft. I think that the disclaimer in the second auction was written by a lawyer. How much BS.....

**Jim Nasium** · 02-19-2010 07:02 AM

Of Course, I agree with all of the above. And about the junk itself, I don't think he used any "machine work". It looks like he ground off the old ID with a disc grinder... Nothing fancy for this guy!! Not to mention the "locating hole" is in the wrong place, and drilled crooked to boot.. No drill press for this guy.. TLAR method works just fine, thank you very much.!!

jim in L/ville

**frankderrico** · 02-19-2010 07:29 AM

Ronnie, hope you have a good show down there. Let us know if you find something, and say hello to PBI for me.....Frank

Thread: 2 IP trigger housings to compare

Thread Tools

Search Thread

Display

2 IP trigger housings to compare

Thank You to painter777 For This Useful Post:

You know, that guy should go to jail

Similar Threads

Current base model Rock Island 1911 compare to service 1911s?

Compare these two slings and laugh

Questions on Trigger Housings

Blued trigger housings on early IBM?

need new trigger for ar

Tags for this Thread

Posting Permissions