Smith Corona finish question

[SteveL]

On a Smith Corona sn# 4773XXX what would be the proper finish on the bands, rear sight etc... I am helping a friend Un-sporterize his. I am ready to parkerize and blue and need some help. Thanks in advance. SteveL

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Johnny Peppers]

Mine is a little later, but has a phosphate finished rear sight with blued windage knob and screw. The lower band is blue with blue swivel, the stacking swivel band is blue with phosphate swivel, and front band is phosphate with blued screw. Bolt is blue with phosphate cocking piece and safety. Trigger guard is phosphate with blued follower, and buttplate is blue. Rear handguard retaining ring is blue. Handguard clips are phosphate.

[USSR]

SteveL,

I've got an unrebuilt, unissued Smith-Corona. The blued parts are the butt plate, all of the bolt (except safety), rear sight (except for the "stepped" portion), all bands (except upper band), all swivels, all screws, and the front sight blade. Hope that helps.

Don

[GMtech485]

Don
Having your serial number range would be heplfull in applying this information.
My understanding is tha SC used both finishes on different parts depending on production range.

[Johnny Peppers]

By the way, my serial number is 4839385, and rifle is as new. Also forgot to add that the safety lug is square.
The mixed finish stacking swivel and band still has the staked screw.

[Loy Hamilton]

did ALL "original" SC rifles come with 100% SC parts or could an "original" SC rifle have contained a mixture of Remington/SC parts?

[Loy Hamilton]

did ALL "original" SC rifles come with 100% SC parts or could an "original" SC rifle have contained a mixture of Remington/SC parts?

X marks the spot handle. Looks black, blue. receiver is "green" park.

[Johnny Peppers]

No Remington parts on an original Smith-Corona.

[John Beard]

No Remington parts on an original Smith-Corona.

Johnny,

For your info, I have seen Remington parts on original Smith-Corona rifles.

Hope this helps.

J.B.

[Johnny Peppers]

I have seen S-C parts on a Remington, but I had no reason to think they were original to the rifle.