Funny Reloading Article (Don't shoot Varget in the rain)

[Edward Horton]

At last the Americans get even with the Australians for stealing the Americas Cup.

P.S. Don't shoot this powder in the rain, your Lithgow Enfield's will explode from excess pressure.

(For those of you who don't understand "Varget" is the Australian ADI AR2208 powder and it is made in Oz)




And now the rest of the story.





Continuation of 180 grain Sierra loads below.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[jmoore]

Has anybody done some real accuracy testing of the 174-180gr bullets at the standard 2440fps+/- ? The IMR4007SSC looks interesting. I'm still using IMR4064, mostly because it works well enough out to 700yds or so.

I'm stupid because I like to be able to just "dial the numbers" for distance. Too much trouble keeping "40'leven" range books organized....

"American Classic", yeah, well, you know how them 'mericans are- taking credit for all the good stuff...

[Son]

Has anybody done some real accuracy testing of the 174-180gr bullets at the standard 2440fps+/- ? The IMR4007SSC looks interesting. I'm still using IMR4064, mostly because it works well enough out to 700yds or so.

I'm stupid because I like to be able to just "dial the numbers" for distance. Too much trouble keeping "40'leven" range books organized....

"American Classic", yeah, well, you know how them 'mericans are- taking credit for all the good stuff...

jmoore, I'm in the same boat. I decided real early on to come up with a load that would keep true to the sights of my Lee Enfields out to 500 yards at least. I started with ADI 2208 (Varget) and looking at the listed muzzle velocities I settled on a starting load of 40gn behind Sierra Matchkings in (yep, you guessed it ) HXP cases- hoping to be close to 2440fps. I haven't checked the speed, but the load has proven true out to 700 yards, shooting same POI (but half the group size) as the HXP milsurp.

A couple of others using thinner walled/ lighter based Remmington cases are using 41 or 42 gns and getting the same results, so case capacity is your main variable, I'd think.

[ireload2]

What do you mean American?
IMR was originated by Dupont and we all know that Dupont is not American.

[Edward Horton]

Mr. jmoore

Wasn't it the original French Native Americans who invented Buffalo Ribeye Steak Au Poivre cooking it over an open camp fire and cooking the French fries in Buffalo lard.

[jmoore]

Mr. jmoore

Wasn't it the original French Native Americans who invented Buffalo Ribeye Steak Au Poivre cooking it over an open camp fire and cooking the French fries in Buffalo lard.

Don't have the faintest idea, but it looks tasty. Cut back on the lard these days, though! Never did the "teepee" thing myself, but the rest looks fairly familiar. Even have the same cast iron pot. Meat thrown over a smoldering fire before the carcass has cooled is the best!

Not quite sure how this ties in w/ Varget. (I sense another motive here, but no "duct taping" today, thanks.)
Oh, never mind!

[Edward Horton]

Mr. jmoore

(The native American joke)

"Someone" stated that DuPont wasn't American because of its French origins, therefore the Remington's were not American because of their English origins, so therefore the Carnegie's of Pennsylvania were not American because of their Irish origins, and the Rockefeller's were not Americans because of their German origins and so on and so on.

On the other hand Mr. jmoore I'm 100% American, my real native American name is "Runswithheadspace" and my mothers maiden name was "Barfingvegemite".

The bottom line in this posting is the Australians now make over 75% of the old Remington/DuPont IMR series of powders. (The remaining 25% of the powders are made in Canada by French-Canadians)

P.S. I also understand jmoore is a native american name that translates to "Makesbentarrows".

[TDH]

Mr. jmoore

(The native American joke)

"Someone" stated that DuPont wasn't American because of its French origins, therefore the Remington's were not American because of their English origins, so therefore the Carnegie's of Pennsylvania were not American because of their Irish origins, and the Rockefeller's were not Americans because of their German origins and so on and so on.

On the other hand Mr. jmoore I'm 100% American, my real native American name is "Runswithheadspace" and my mothers maiden name was "Barfingvegemite".

The bottom line in this posting is the Australians now make over 75% of the old Remington/DuPont IMR series of powders. (The remaining 25% of the powders are made in Canada by French-Canadians)

P.S. I also understand jmoore is a native american name that translates to "Makesbentarrows".

That's my Indian name Makesbentarrows. I was given that name by heap big medicine man after last 3D shoot.

[Paul B]

Don't have the faintest idea, but it looks tasty. Cut back on the lard these days, though! Never did the "teepee" thing myself, but the rest looks fairly familiar. Even have the same cast iron pot. Meat thrown over a smoldering fire before the carcass has cooled is the best!

Not quite sure how this ties in w/ Varget. (I sense another motive here, but no "duct taping" today, thanks.)
Oh, never mind!

41.0 gns Varget/2208 is great in the 303 ive dispacted many a vegemite thief with that load,nice to see you and your wife still go camping together

[jmoore]

41.0 gns Varget/2208 is great in the 303 ive dispacted many a vegemite thief with that load,nice to see you and your wife still go camping together

Oh, no! The secret's out!