+ Reply to Thread
Results 1 to 5 of 5

Thread: Help with identifying a cartridge chit?

Click here to increase the font size Click here to reduce the font size

Hybrid View

Diamondtreo Help with identifying a... 05-18-2010, 11:40 PM
jonnyc Easiest way is to call your... 05-19-2010, 06:09 AM
smellie Pretty sure this would be... 07-27-2010, 01:10 PM
Bruce McAskill If it's M2 ball ammo then it... 07-27-2010, 05:25 PM
Maple_Leaf_Eh Silly lingistics question -... 07-27-2010, 09:18 PM
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Diamondtreo's Avatar
    Join Date
    Mar 2009
    Last On
    06-02-2013 @ 01:43 AM
    Location
    Everett, Wa
    Age
    75
    Posts
    8
    Local Date
    05-25-2025
    Local Time
    04:10 PM

    Help with identifying a cartridge chit?

    A friend of mine received a Springfield 1903 from his dad along with a few bandolliers of surplus ammo. Tucked inside ine of the pockets in each bandollier was a chit identifying Twin Cities Ord. Plant as the originator and lot number is listed on the other side.

    Is there a way to determine when these cartridges were manufactured? Ok, I just thought of looking at the headstamp on the cartridges, however all I have in front of me is the chit - my friend has all the ammo.

    Thanks in advance, John
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    jonnyc's Avatar
    Join Date
    Sep 2008
    Last On
    07-03-2024 @ 10:42 PM
    Location
    PA, USA
    Posts
    653
    Local Date
    05-25-2025
    Local Time
    05:10 PM
    Easiest way is to call your friend re: the headstamp.

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    05-25-2025
    Local Time
    05:10 PM
    Pretty sure this would be CORROSIVE ammunition in any case.

    Twin Cities Ordnance Plant (TW headstamp) made a lot of stuff in War Two but they closed relatively early. Primer at that time was the FA 70, which was a Chlorate primer and thus corrosive.

    Brass will be okay, though, once it is annealed. OR, and this could be fun, you can pull down a few rounds, pop the primers and reload the cases with the original charges. This will show you just HOW GOOD this stuff was when it was made. It's always the primers that deteriorate faster than anything else.

    I have done this with that junk Turkishicon 8x57 and find I am getting groups just a hair over 1 MOA!!! Johnny Turk really knew what he was doing and so, I expect, did the guys at Twin Cities. Give it a try. You just might surprise yourself.

    US only went completely to non-corrosive smallarms primers in 1953, late in the year. Stuff dated 1954 and later is all noncorrosive. The only exception to this is M-1 Carbine ammo, which was ALL noncorrosive right from Day One.

    Hope this helps.

  5. #4
    Legacy Member Bruce McAskill's Avatar
    Join Date
    Mar 2009
    Last On
    01-17-2023 @ 09:10 PM
    Posts
    1,880
    Local Date
    05-25-2025
    Local Time
    04:10 PM
    If it's M2 ball ammo then it is corrosive. TW started using non corrosive primers in Dec, 1951 with lot #19362

  6. #5
    Legacy Member Maple_Leaf_Eh's Avatar
    Join Date
    Feb 2007
    Last On
    01-02-2025 @ 09:04 PM
    Posts
    255
    Local Date
    05-25-2025
    Local Time
    04:10 PM
    Silly lingistics question - "chit" is a name for a notice or a slip of paper, a small form. A member in good standing might run a mess chit or bar tab. A soldier on course whose dress or inspection was below standard might get a red chit. I always thought it was an India word brought into the Britishicon army, that was so useful the Canadians absorbed its use. And, here we see another use of the word by Americans. So maybe this word came into use much longer ago.

+ Reply to Thread

Similar Threads

  1. no.4 era cartridge belts?
    By lovemymilsurps in forum Vintage Military Gear
    Replies: 14
    Last Post: 06-27-2011, 09:56 PM
  2. M1 Cartridge Belt Value?? WW1 Sewing Kit
    By pan957 in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 04-24-2010, 08:58 PM
  3. 8.15X46R cartridge
    By Hank45 in forum Ammunition and Reloading for Old Milsurps
    Replies: 3
    Last Post: 12-03-2009, 02:56 PM
  4. Strange cartridge, anyone?
    By ob'98 in forum Milsurps General Discussion Forum
    Replies: 5
    Last Post: 09-06-2009, 07:47 PM
  5. .39 pistol cartridge?
    By Jim Long in forum M1/M2 Carbine
    Replies: 1
    Last Post: 06-16-2009, 09:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Loading...