Ross 1905 Commercial Find

[green]

Speaking of reloaded ammunition, my II** will not accept full length sized cases previously fired in a Lee Enfield Rifle. I found it necessary to make a die to size the FL sized cases to a smaller diameter back toward the head. The Ross chamber is not the same as a Lee Enfield chamber. No doubt this contributed to the accuracy of these rifles.

This my experience with a target and two sevice MkII**s. Used to have resize LE fired .303" brass in a Lyman hand sizing die. Then acquired an RCBS die that sized the base enough. My other RCBS die does not size the case enough. That one die must have been made with a worn cutter.