AMMUNITION RELOADING DISCLAIMER: Any and all equipment, materials, and data mentioned on our boards are for informational purposes only, and are not intended to promote or endorse any particular products or technique. Any and all recipes, techniques, and data are to be used at your own risk. We accept no responsibility for the use or misuse of any information found on this wed site.

Please Note: All reloading activity should be done in strict accordance of the manufacturers' specifications printed in their manuals. Milsurps.com and it's members will be held harmless of any and all information related to reloading data and the use of any ammunition submitted on these boards.

Due to the age and unknown maintenance and modifications of ex-military weapons there is always an inherent risk of personal injury including death, even when properly loaded ammunition is used. Inherently, reloading ammunition can be dangerous even in new weapons - Adding to this ammunition risk, many milsurp weapons are often well over half a century old with no knowledge of their maintenance and modifications over the many years while in civilian ownership. Milsurps.com does not endorse or take responsibility for discharging any weapon.

Results 1 to 10 of 12

Thread: Are .303 Enfield surplus bullet components transferrable to a 7.7 Arisaka?

BJung Are .303 Enfield surplus... 11-10-2021, 02:01 AM

Daan Kemp Sound feasible as long as you... 11-10-2021, 02:48 AM

Bruce_in_Oz There were THREE "7.7"... 11-10-2021, 06:18 AM

bob q Another internet myth . The... 11-10-2021, 08:33 AM

Parashooter https://www.milsurps.com/attac... 11-10-2021, 11:57 AM

Bruce_in_Oz Furthermore, a LOT of Type 99... 11-10-2021, 04:11 PM

Daan Kemp Compare the dimensions of the... 11-11-2021, 06:46 AM

bob q The 8x57mm case head size was... 11-11-2021, 08:52 AM

Bruce_in_Oz 121377 Imperial Metric ... 11-11-2021, 08:01 PM

Parashooter Here's CIP dimensions for... 11-12-2021, 12:50 AM

bob q My original Japanese WWII... 11-13-2021, 05:44 PM

Eaglelord17 I have never used .303 to... 11-13-2021, 07:29 PM

Thank You to bob q For This Useful Post: