PH5C micrometer sight

[Alan de Enfield]

Forgive me if I am wrong, but Alan's earlier comment about the PH5C's sight mount (the bit that stays on the rifle after you have removed the sight arm) covering over part of the dovetail on the BA21 rear base means that if you have the PH5C sight mount on the rifle with a BA21 rear mount, you will not be able to fit the rings to mount a scope. In other words, you would have to remove the sight mount completely before you could fit a scope. The only way you are going to have a set-up with a quickly interchangeable aperture rear sight and a scope on the rifle if you are using the BA21 rear base is to use a PH5E/4, which clears the dovetail. Then again, you would then be working on an Enforcer clone, and would have to either get hold of an Enforcer safety (rocking horse poo), grind a normal one down to fit or put up with not having a functioning safety (this has been discussed here recently).

I, of course, could be talking out of my butt as I am not actually functionally awake right now..

A perfect summary - I know from experience - I've tried and failed !!!

If you fit a 5C you cannot use the BA21 and scope rings.
If you fit a 5E sight then you can use the scope sight rings but you cannot use the safety.

The answer is - get hold of a 5E sight and make a new shortened safety (you cannot buy one - they are at least 10 shelves above rocking horse poo & hens teeth)

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Boom-Boom]

A perfect summary - I know from experience - I've tried and failed !!!

If you fit a 5C you cannot use the BA21 and scope rings.
If you fit a 5E sight then you can use the scope sight rings but you cannot use the safety.

The answer is - get hold of a 5E sight and make a new shortened safety (you cannot buy one - they are at least 10 shelves above rocking horse poo & hens teeth)

Thank you Alan for the perfect summary.

I wonder if I could find a 5E to buy or trade for a 5C??

Worse case scenario, I will have to fit or remove the 5C if I want to enjoy the peep with the excellent AJP MatchMaker front sight system, or the glass system.

BB

[Alan de Enfield]

Thank you Alan for the perfect summary.

I wonder if I could find a 5E to buy or trade for a 5C??

BB

Make sure that you look for a PH 5E/4 and not a 5E.
the 5E was for the Mauser action and the shape is completely different to an Enfield No4 action.
Few and far between and a bit more expensive than a 5C
Good luck

Repeat - it must be a 5E/4

[Enfieldlock]

Make sure that you look for a PH 5E/4 and not a 5E.
the 5E was for the Mauser action and the shape is completely different to an Enfield No4 action.
Few and far between and a bit more expensive than a 5C
Good luck

Repeat - it must be a 5E/4

I think we have some 5Es or TZs in the bits box.