Suggestions for duplication M1 Ball ammo loads

[FTD1167]

Thanks Skip I would be looking for actual weighs of the powder. I tend to use a scale on almost all my loads or at a min a very practiced powder charger. do you know how many grains your dipper is dipping?

I would be looking for sub 3" groups at 100 yards to start.

Lee Dipper for the carbine puts out 14gr of 4227.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Mark W.]

Lee Dipper for the carbine puts out 14gr of 4227.

Thanks good to know

[Mark W.]

Thanks Guys lots of real good info coming here. I guess I'm lucky my stock looks like **** but fits the barreled action very well with no noticable play on either end. I've built and beeded a number of rifle and Muzzle loaders stocks in my day and might do some work on this Carbine after I locate a nice Pot belly stock to work off of.

The load info will be very useful I picked up a pound of IMR 4227 and WW 296 to work some loads up with. I'll be shooting a 110gr FMJ, 110gr HP, and 110gr cast copper coated, and working up 3-4 loads for various use. Should be a lot of fun.