M1 Garand IHC and HRA Buttstocks

[Rick B]

Lets see if this will show proper size. The HRA here has a step on the wing and IHC has smooth undersides. The stars appear a bit smaller on a IHC. The Arrows are closer to the bottom of the box on the IHC. There are enough differences here that it is strange. By the way I in no way say this is fake at all. I just know that I have seen a ton of after war rebuild period Overtons that were in Birch and Walnut with large back porches. I also know for a fact that Winchester was still making Stocks after WWII after talking to a worker who remember being there after WWII. Their is no reason HRA may not have contracted this also and Overton roughed in the stocks for them. All possibilities but most probably HRA had Overton make rough them in and they finished them. Clearly with the Overton V-notch they made this stock initially. It very well could have been a rebuild that SA used. The door is open way to much to say anything positive at this time. I know that Scott DUff had something going a few years back on this as someone seen them at CMP. The problem was I think they said HRA made them for Overton but that is not possible. Overton would not make them, send them to HRA then send them to IHC. I am just thinking off the top of my head here so take all of this at face value for now. . I need a clearer picture of the DAS on this stock and I can do a all around comparison. This pic may be enough that I am way off base also because depth of the stamp can cause differences along with a blurred picture like we have when blown up. Rick B



---------- Post added at 04:06 PM ---------- Previous post was at 03:58 PM ----------

Ok, here are the three together and I am starting to wonder if HRA later had a different DAS. I never really put much thought into this until now. All of the heads look differnet. Rick B

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Joe W]

Overton would not make them, send them to HRA then send them to IHC

The above quote is what I don't understand. If some HRA stocks were used on 5.0 to 5.2 IHC rifles why do you feel that HRA would not send them to IHC ? Unless you are saying that the DAS on the OPs stock is clearly not IHC.
Thanks for the pictures of the DAS. They are interesting. I am sure if you could see the OPs stock you would come up with the right answer.

[Joe W]

I know that Scott Duff had something going a few years back on this as someone seen them at CMP. The problem was I think they said HRA made them for Overton but that is not possible.

I think you may be referring to the article by Scott Duff "Featured Rifle IHC s/n 5169890" found in the Spring 2005 edition of the Garand Collectors Journal. In this article Scott states "Some years ago I noticed that the CMP was finding a lot of apparently original IHC M1 rifles in the 5-million serial number range that were equipped with HRA stocks." Scott goes on to say " The database includes information on slightly over 1000 original IHC rifles in this 5 million s/n range. To date, the lowest observed rifle with an H&R stock is 5032040 and the highest is s/n 5205413, which is a "gap letter" variant. The heaviest concentration of H&R stock usage appears to be in the 5.15 to 5.17 mil. s/n range. Approximately 970 rifles are listed in the database between s/n 5032040 and 5205413. Of these, 199, or slightly over 20 %, are equipped with H&R stocks."
There is no mention in this article of HRA making stocks for Overton.
As these stocks most likely were manufactured by HRA not Overton the OPs stock is not original to his rifle. Guess it is possible that a prior owner put that stock on the rifle figuring, do to the s/n of the rifle, it would be a less costly alternative than a IHC stock. This is what I was telling the OP to do, but I did not realize the stock was Overton.

I guess as far as the OPs stock we are back to the original question, if not HRA, what is it ? We know it is not IHC or Winchester, so what is left ? A replacement stock ?? And still need to figure out the "P" proof and the DAS. Guess it's things like this that keep our interest.

[Rick B]

I have a feeling no one ever looked at the V-notch on those rifles from the late IHC's and can bet in the end they may have deleted the number system and enlarged there stock sizes like plenty of the rebuilt fatties as I call them I have seen. The V-notch may have just been a oversight and I still to this day cannot understand why one of the largest stock makers in the world would have HRA do some of their work? It just doesn't make sense and is the worst thing about not being there back then to see what really happened. This is something I brought up on the boards well before the article and I think Bodyman was talking about this find but I cannot remember now. I interjected about the Overton body style and no one wanted to answer. maybe because it ruined their Idea about these stocks but not sure.

I would like to see these late model HRA stocks built for IHC's and if they have the V-notch this whole theory is incorrect. I know for a fact that Overton built stocks for HRA when they fell behind and built hand guards for them also.

Hasn't anyone figured out a time machine yet??? Rick B

[Rick B]

A quick note, I am not saying IHC didn't receive some HRA stocks and possibly left overs at the end but I am saying if the reported HRAs on IHCs have the V-notch then the theory has to be rethought. I didn't want anyone think I was saying Scott Duffs article was incorrect. Rick B

[broomhandle]

So what's the consensus as to if this is the correct stock for the rifle, or is it too arguable to know ?

[Rick B]

So what's the consensus as to if this is the correct stock for the rifle, or is it too arguable to know ?

I wouldn't call it too arguable, its more like misunderstood at this point. There are to many things different than the norm and I wouldn't change a thing if this is the way it was received. If you feel the need to get a Barrel Channel marked IHC make sure you keep this stock until more is figured out. This stock is clearly an Overton but someone like Wayne Bradford may have more information on this stock and why it was used if it was. Rick B