My rifle serial number is 4183XXX. The barrel is stamped with the "flaming bomb" and RA and dated 11-43. Both the buttswivel and handguard ring are marked with an RP. The only parts which aren't R marked are the follower and stacking swivel (assuming Smith and Corona, both are blued and stamped), cocking piece (unmarked, looks to be off a 1903 from Springfield Armory), the rear sight assembly (Hadley tool company), striker sleeve (assuming this is correct because I cannot find an "R" marked one anywhere online??), and retaining band (can't really tell on that one, not sure if you have to take it off to see it. If that's the case, haven't done so yet).

I already bought an "R" marked stamped follower and stacking swivel and will be going through gunbroker for the rear sight and Amherst Depot for the cocking piece and the front band screw (threads are buggered)

All small parts are blued including the entire bolt assembly. With the barrel and receiver being parkerized with a green tinge.

Stock was refinished, what looks like, 40+ years ago by the original owner in seeing the cartouches are quite faint and you can make out subtle sandpaper marks. I can make out the cartouches FJA (unboxed), RA, ordnance stamp (crossed cannons), circled proof "P" behind the trigger guard, and 4 sub-inspector marks in front of the trigger guard/floorplate (no diamonds). The retaining band/spring cut is squared off as it should be on a Remington manufactured stock.

---------- Post added at 10:09 AM ---------- Previous post was at 10:06 AM ----------

Thx for the answers so far everyone!