1. It appears that you are you're enjoying our Military Surplus Collectors Forums, but haven't created an account yet. As an unregistered guest, your are unable to post and are limited to the amount of viewing time you will receive, so why not take a minute to Register for your own free account now? As a member you get free access to our forums and knowledge libraries, plus the ability to post your own messages and communicate directly with other members. So, if you'd like to join our community, please CLICK HERE to Register !

    Already a member? Login at the top right corner of this page to stop seeing this message.

+ Reply to Thread
Results 1 to 6 of 6
Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Legacy Member Sht_LE's Avatar
    Join Date
    Jan 2010
    Last On
    04-26-2025 @ 11:27 AM
    Location
    Southern U.S.
    Posts
    94
    Local Date
    04-29-2025
    Local Time
    07:14 AM
    Have a L.E. Mk.I that had the same problem when I first got it. It was caused by a worn sear. I replaced the sear and it was as good as new. Unfortunately that was many years ago when you could get a sear from Springfield Sporters, not sure wear you could get a new one now. However if it is not badly worn stoning it might solve the problem.

    Without looking at the rifle I am not sure why it would be marked EY and then DP, but I have similar thinking to yours in that it was an older arm. I own a 1944 dated Ishapore SMLE MK.III* that is DP marked on just about every part that you can imagine and it looks like it was just made (even has all matching numbers). I took it apart and could find nothing wrong wrong with it at all (the bore even gauges as new). As far as I can tell the only thing that makes it a DP rifle is the stamps all over it, but it shoots accurately.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 05:37 AM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,719
    Real Name
    Alan De Enfield
    Local Date
    04-29-2025
    Local Time
    12:14 PM
    Quote Originally Posted by Sht_LE View Post
    As far as I can tell the only thing that makes it a DP rifle is the stamps all over it, but it shoots accurately.
    Risky !!!!!!!!
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    Legacy Member Sht_LE's Avatar
    Join Date
    Jan 2010
    Last On
    04-26-2025 @ 11:27 AM
    Location
    Southern U.S.
    Posts
    94
    Local Date
    04-29-2025
    Local Time
    07:14 AM
    Not too risky, because I inspected EVERYTHING in detail and being a gunsmith had the right tools to do it. In detail I took it compleatly apart (I even pulled the barrel) then visably inspected everything. I magnafluxed the action body, bolt, bolt head and barrel and did another inspection. Then I used a borescope and checked out the inside of the barrel, reassembled it set the headspace and gave it to a friend of mine who is also a gunsmith. I asked him to go over it and see if he could find anything wrong with it. He could not. So after we both inspected it I shot five rounds of PPU ammo through it that was remote fired. When that did not blow it up I fired five rounds off a bench. It put them inside 3" at 100 yards. So far that is the only ammo it has fired and that has been several years ago. It actually came in to the gunstore I work in a lot of five rifles we ordered from Century Arms. It was the only one that was DP marked and I never could figure out why it was DP marked, but the owner of the store did not want to sell it to a customer so let me have it at cost.

  5. Thank You to Sht_LE For This Useful Post:


+ Reply to Thread

Similar Threads

  1. IAI M1 Garand with Issues
    By Sandrjam in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 09-06-2010, 06:20 PM
  2. MN chambering issues
    By mac1911 in forum Soviet Bloc Rifles
    Replies: 3
    Last Post: 01-26-2010, 09:04 AM
  3. P14 Feeding Issues
    By fatti in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 11
    Last Post: 08-11-2009, 12:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts