-
FREE MEMBER
NO Posting or PM's Allowed
Greetings,
While attempting to find out what I purchased this past weekend, I came across this site. The site looks to be very informative so register I did.
My main interest lies in milsurp. rifles and pistols. I thoroughly enjoy finding sporterized rifles and attempting to restore them to as near original configuration as possible.
The rifle in question is a Longbranch 1943 SN 56L3035. Everything about the gun seems to be correct save for the cut down forend and removal of the front sight guards. I am hoping to find parts to restore the rifle and came across this sight in my initial search. Will probalbly have lots of questions so please bear with me if I post excessively.
Bulletbob
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
03-20-2012 06:29 PM
# ADS
Friends and Sponsors
-
Legacy Member
-
The Following 2 Members Say Thank You to Rumpelhardt For This Useful Post:
-
-
Or you could do it all in one hit by going straight to Brian at BDLLtd in SC. All of the compliments given in the above thread apply to Brian
-
The Following 2 Members Say Thank You to Peter Laidler For This Useful Post:
-
FREE MEMBER
NO Posting or PM's Allowed
thanks for the recommendations. I have dealt with e-gunparts previously, heard good things about Springfield Sporters and will try them for Long Branch parts. Was not familiar with libertytree. will look into their offerings too.
I also have a 1943 Lithgow, No.1 mkIII that needs a coachwood forstock. I bought the handguard and nose piece from a gent from Australia
. would really like to keep with coachwood all over if possible. Any ideas?
-
Legacy Member

Originally Posted by
bulletbob
I also have a 1943 Lithgow, No.1 mkIII that needs a coachwood forstock. I bought the handguard and nose piece from a gent from
Australia
. would really like to keep with coachwood all over if possible. Any ideas?
I have an Idea we both search and one of us finds two and tells the other.
You will find very helpful folks here. The two previous replys covered the other question quite well.
Brian at BDL
is both knowledgeable and helpful. I believe Liberty tree has the coachwood buttstock (which I already have) but no forestock. The forestock will be your problem to find. Good luck and keep me in mind if you find a source.
PS
I will make you a great deal on a coachwood forestock bobbed at the rear barrel band.
Please post pictures of your projects to inspire me.
Last edited by HOOKED ON HISTORY; 03-21-2012 at 07:06 PM.
-
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
HOOKED ON HISTORY
I have an Idea we both search and one of us finds two and tells the other.
You will find very helpful folks here. The two previous replys covered the other question quite well.
Brian at
BDL
is both knowledgeable and helpful. I believe Liberty tree has the coachwood buttstock (which I already have) but no forestock. The forestock will be your problem to find. Good luck and keep me in mind if you find a source.
PS
I will make you a great deal on a coachwood forestock bobbed at the rear barrel band.
Please post pictures of your projects to inspire me.
your idea of both of us searching is great! two sets of eyes are far better than one. The fellow that sold me the handguard and nose cap from Aus. had a foreend - he needed $300 shipped. thought that was too much. At any rate, if we both look and if either of us find two, I agree to let you know. p.s. Is there a wood in the USA
that is similar to coach wood?
-
Legacy Member

Originally Posted by
bulletbob
Is there a wood in the
USA
that is similar to coach wood?
Best I can tell from looking at photos Beech seems to be the closest. I might have to try a beechwood forstock with the coachwood buttstock and handguard.I suppose I could post for some opinions from some of the more "seasoned" collectors as I am certian we are not the first to face this issue. What is left of my bobbed coachwood forestock has the (I forget the correct terminoligy please forgive the paraphrase) Recoil reinforcement blocks at the inside rear of the forestock but still has a crack. Delicate stuff that coachwood. The wood on my No2 MkIV is quite nice and in excellent shape I believe it to be coachwood.
-
-
FREE MEMBER
NO Posting or PM's Allowed

Originally Posted by
HOOKED ON HISTORY
Best I can tell from looking at photos Beech seems to be the closest. I might have to try a beechwood forstock with the coachwood buttstock and handguard.I suppose I could post for some opinions from some of the more "seasoned" collectors as I am certian we are not the first to face this issue. What is left of my bobbed coachwood forestock has the (I forget the correct terminoligy please forgive the paraphrase) Recoil reinforcement blocks at the inside rear of the forestock but still has a crack. Delicate stuff that coachwood. The wood on my No2 MkIV is quite nice and in excellent shape I believe it to be coachwood.
Nice looking rifle! If I can't find coachwood I may have to settle for beechwood. Guess I'll keep on searching for the holy grail. Thanks for your input Hooked.
Bob
-
Legacy Member
Beechwood forestock will only serve to let me enjoy the rifle while looking for the grail.
-
-
Legacy Member

Originally Posted by
HOOKED ON HISTORY
Beechwood forestock will only serve to let me enjoy the rifle while looking for the grail.
Good luck
I've been a little over a year looking for a walnut forearm that I can actually afford to replace the beech one I put on my No.4.
-