Range Report - 1891 Carcano (1896)

[jmoore]

I find the old Carcano bullets with the slight rim on the open base that (presumably) upsets to form a small driving band to be ballistically more convincing - and less hazardous!

Winchester must have thought so, too, as the bullet made for the .264 Winchester Magnum was designed as a dual diameter projectile. Bore riding dia. up front with a groove diameter section at the rear. Good luck finding any "loose", though.

The data table above is what is more or less ended up in the Hornady manual. But, like you, I have noted that the bullets currently sold are NOT 0.2676" Diameter. Significant? Dunno. Hornady seems to have used both 0.268" and 0.267" when referring to the Carcano projectile.

But the maximum military bullet dia. of 0.2669" is so close to the current Hornady size (0.2672"), it seems that some other factor in the bullet's construction would be to blame for a run up in pressures.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.