Questionable reduced loads with slow rifle powder. Should I be concerned?

[ronnieboy]

hey guys, i load 22.5 grains of bluedot in my 03A3 06 loads. use 147 gr m80 pulled bullets with cci200 large rifle primers. i drop the powder charge with my lyman powder dispenser, in the 50 round charge block , then i take a marked dowel rod and check EACH AND EVERY case for proper fill. seat the bullet half way then spin 90 degrees then fully seat bullet. they shoot very very accurately, and very cheap too. reduced recoil , muzzle blast, and wear , they are bout 2200 ftp second. later ron

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Pyno&dyno]

Do you guys prefer to run lighter than usual bullet or do you use the standard weight with your reduced loads?Actually I use standard weight , I mean the same weight when using full loads, but I wonder if you ever tried heavier bullets, for example 190 grs in a 30-06.