Speer, Hornady, and Lyman have published loads for H335:

Primer/tested OAL/Barrel Length/Twist Rate/Starting Charge/Max. Charge/Max Vel.

Speer: CCI 450 (magnum primer)/2.215"/22"/1-12"/24.0g/26.0g/3092 fps

Hornady: Win WSR/2.200"/26"/1-12"/20.8g/23.2g/3100 fps

Lyman: Rem 7 1/2 SR/2.260"/20"/1-12"/24.3g/27.0g/3270 fps

Note: There is a substantial difference in recommended maximum loads between the three manuals. Lyman has the highest maximum charge. I think this is primarily due to the longer OAL of the cartridge. (Longer cartridge = less pressure)
I guess this just reinforces the reasons we should start at the minimum, and slowly and carefully work our way up to the maximum loads, if so desired.

I know it's not on your list, but I use 25.4 grains of AA2700 powder, Federal #205 SR primers, Winchester and Lake City brass, 55 grain moly coated Sierra FMJ bullets, and 2.250" OAL.