+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: some questions on a new No4mk1*

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    jessehh's Avatar
    Join Date
    Aug 2013
    Last On
    01-14-2015 @ 08:47 PM
    Location
    Oconomowoc, WI
    Posts
    42
    Local Date
    04-30-2025
    Local Time
    02:14 PM

    some questions on a new No4mk1*

    Attachment 45423Attachment 45422

    I just have a quick question about my new to me No4 Mk1*. It has FTR on the side with a date of 1963. On the receiver it has No4Mk1* but no "US property" markings. All the bits are of different makes, some "C" stamped and some "S" stamped. The butt is SA stamped. The plus side is that the bore is shiney and the barrel and receiver "match". Now the questions, is the serial number original (doesn't look ground down or molested) to the manufacturer? The serial number is 6 digits long. Was this an Indian rebuild (has "ishy screw in place)?
    This is intended to be a shooter so I really wasnt worried about the value of matching this and that, I just would like a little more info then I can find on the interwebs.
    Thanks in advance,
    jesse
    If she shoot well enough I might try and make it a fake sniper No4. Also, the first pic is of my No1Mk111* and my k98.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by jessehh; 08-28-2013 at 08:39 PM.

  2. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    ssj's Avatar
    Join Date
    Jun 2013
    Last On
    11-13-2017 @ 01:21 PM
    Location
    New Zealand
    Posts
    651
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    Need bigger pics please?

    Based on what you have said,

    If the serial number is something like 0Cxxxxx that is correct, C is the initial of the factory where it was made. A square S or S inside a square would be Savage parts so probably original. The bolt serial number should match the receiver for safety sake.

    Telling us the serial number would probably revel the year if it isnt stamped on the wrist, unstamped would be later 1943 or 1944.

    If its has something like,

    "no4 mk 1/3 FTR F xxxxx"

    it would probably be an upgrade done in the UKicon.

    If it has just "FTR" and an Isshy screw it was probably indeed FTR'd in india.

    Does it have a 2 or 5 groove barrel? The barrel might have a date say F50 or something....thats the year and F is the maker. There is a proof mark as well, that helps say were its from.

    If "US property" is missing, I think its not unknown to be ground off by India?

    That's my best guess...other's know far more than I, so I might be corrected.
    Last edited by ssj; 08-28-2013 at 08:52 PM.

  3. Avoid Ads - Become a Contributing Member - Click HERE
  4. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    jessehh's Avatar
    Join Date
    Aug 2013
    Last On
    01-14-2015 @ 08:47 PM
    Location
    Oconomowoc, WI
    Posts
    42
    Local Date
    04-30-2025
    Local Time
    02:14 PM
    Thread Starter
    The serial number is a straight 6 numbers with no letters included. The "No4Mk1*" is original when compared to other rifles I've seen. The stamping near the loud end of the barrel is "half struck" in that I can only see the upper half of what was stamped. Trust me, I have looked with a magnifying glass and still can't really make out what the are. There are 2 groves in the barrel and unfortunately the bolt doesn't match the rest of the metal parts. The guy who I got it from did say that he shot it with no problems. I have known him for years and trust what he says.
    I will take a closer look at everything when I get home and try and get better pics.

  5. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    ssj's Avatar
    Join Date
    Jun 2013
    Last On
    11-13-2017 @ 01:21 PM
    Location
    New Zealand
    Posts
    651
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    As far as I am aware if its a mk1* there should be a letter. If its and "L" its Longbranch made, if its a C its Savage made. If its a mk1 It should start with 1 or 2 letters, though a mk1 is possible with L or C, but they are not common.

  6. #5
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    03-27-2025 @ 11:44 PM
    Location
    Zombie Town, now with a H
    Posts
    778
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    Quote Originally Posted by ssj View Post
    As far as I am aware if its a mk1* there should be a letter. If its and "L" its Longbranch made, if its a C its Savage made. If its a mk1 It should start with 1 or 2 letters, though a mk1 is possible with L or C, but they are not common.
    Maltby (iirc) made some No4s stamped as Mk1* but for what reason, is an unknown.

  7. Thank You to 5thBatt For This Useful Post:

    ssj

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    ssj's Avatar
    Join Date
    Jun 2013
    Last On
    11-13-2017 @ 01:21 PM
    Location
    New Zealand
    Posts
    651
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    Take the bolt and a whiteboard marker. Clean the bolt lugs with a paper cloth and paint on the marker, close the bolt 2 or 3 times, the whiteboard marker should be scraped off both lugs and there should be a decent sized area on both say at least a 1/4 of the lug area, if its only 1 lug I wouldnt fire it myself.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    jessehh's Avatar
    Join Date
    Aug 2013
    Last On
    01-14-2015 @ 08:47 PM
    Location
    Oconomowoc, WI
    Posts
    42
    Local Date
    04-30-2025
    Local Time
    02:14 PM
    Thread Starter
    Will do! Just hope the wife is still up as getting to the gun locker is not a silent endevour.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    jessehh's Avatar
    Join Date
    Aug 2013
    Last On
    01-14-2015 @ 08:47 PM
    Location
    Oconomowoc, WI
    Posts
    42
    Local Date
    04-30-2025
    Local Time
    02:14 PM
    Thread Starter
    Serial number reads 60188 and the bolt lugs shows good wear on one side and slight on the other.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    ssj's Avatar
    Join Date
    Jun 2013
    Last On
    11-13-2017 @ 01:21 PM
    Location
    New Zealand
    Posts
    651
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    I got almost got fooled by that wear just last week. The bolt had had its number falsified, when I checked with whiteboard marker it was one side only.

    More experienced ppl need to help with a serial number like "60188" its like no serial number in my books or that I have seen.

    ---------- Post added at 10:40 AM ---------- Previous post was at 10:39 AM ----------

    Quote Originally Posted by 5thBatt View Post
    Maltby (iirc) made some No4s stamped as Mk1* but for what reason, is an unknown.
    However they are still numbered starting with a letter? and then a 2?

  12. #10
    Legacy Member 5thBatt's Avatar
    Join Date
    Dec 2007
    Last On
    03-27-2025 @ 11:44 PM
    Location
    Zombie Town, now with a H
    Posts
    778
    Local Date
    05-01-2025
    Local Time
    09:14 AM
    Quote Originally Posted by ssj View Post
    However they are still numbered starting with a letter? and then a 2?
    Cant really answer that for you ssj, I'm not into the No4 so don't have a great deal of knowledge on them, i only have one as i feel i have too, a 1943 Savage (Stevens ) Mk1* & a close relative, a No1 MkVI


    Last edited by 5thBatt; 08-30-2013 at 09:45 PM.

  13. Thank You to 5thBatt For This Useful Post:

    ssj

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. 1941 Fazakerley No.4 Mk.1 missing pieces - questions, questions, questions....
    By spinecracker in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 24
    Last Post: 11-05-2011, 05:31 PM
  2. New No4mk1/2
    By McCraggen in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 09-19-2011, 11:08 AM
  3. Savage No4Mk1*(T) Questions
    By gsthreeeight in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 26
    Last Post: 05-31-2011, 09:00 PM
  4. My new No4Mk1(t)
    By Garandrew in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 05-13-2011, 02:46 PM
  5. No4MK1 Pics and questions
    By pred66 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 10-13-2008, 04:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts