Results 1 to 10 of 118

Thread: Advice needed ... bolt opens on firing!

Click here to increase the font size Click here to reduce the font size

Threaded View

spentprimer Advice needed ... bolt opens... 09-14-2013, 07:58 AM
Peter Laidler The GOOD news is that even if... 09-14-2013, 09:11 AM
spentprimer Peter, I don't want to... 09-14-2013, 10:15 AM
Son Have heard of a couple of... 09-14-2013, 10:19 AM
spentprimer This makes sense to me and is... 09-14-2013, 11:25 AM
Peter Laidler You ain't misleading me spent... 09-14-2013, 12:47 PM
spentprimer Peter-I will give this a try. 09-14-2013, 05:35 PM
spentprimer Peter, I did your described... 09-14-2013, 07:41 PM
Thunderbox Although many/most old SMLEs... 09-14-2013, 12:54 PM
spentprimer I just took a closer look at... 09-14-2013, 06:00 PM
spentprimer Out to the range 09-19-2013, 03:05 PM
spentprimer I got into my spent round box... 09-19-2013, 03:49 PM
spentprimer Range Time Next 10-15-2013, 04:33 PM
303Guy It sounds like the striker... 09-14-2013, 04:14 PM
Peter Laidler The right hand side LONG... 09-14-2013, 06:01 PM
spentprimer Both locking shoulders bear... 09-14-2013, 06:34 PM
Son Thank you Thunderbox. I... 09-14-2013, 06:03 PM
303Guy Could it be the bolt cam and... 09-18-2013, 06:04 PM
spentprimer I just got off the phone with... 09-18-2013, 06:32 PM
5thBatt I'll just throw this out... 09-14-2013, 06:58 PM
spentprimer I just checked it and it does... 09-14-2013, 07:13 PM
Peter Laidler Phew............ We've had... 09-15-2013, 06:08 AM
browningautorifle Pretty funny...! 09-15-2013, 11:28 AM
muffett.2008 Is it only me? or has anyone... 09-15-2013, 05:22 PM
303Guy I am really interested in... 09-15-2013, 05:56 PM
Parashooter No, it's not caused by the... 09-16-2013, 01:42 AM
5thBatt Yes i believe that is the... 09-15-2013, 06:20 PM
Bruce_in_Oz Try this: 1. Cock the... 09-15-2013, 07:20 PM
303Guy So this particular rifle has... 09-15-2013, 08:16 PM
gewehrsniper I have a no4 mk1 rifle that... 09-15-2013, 08:18 PM
5thBatt Give me 5 Min guys, just got... 09-15-2013, 08:25 PM
Son Thank you Parashooter, for... 09-16-2013, 03:15 AM
Peter Laidler We're wayyyyyyyyy off the... 09-16-2013, 04:58 AM
5thBatt Harmonics maybe?? The two... 09-16-2013, 06:07 AM
303Guy Thanks all. I've noticed... 09-16-2013, 07:37 AM
jmoore And there's the likely... 09-17-2013, 12:48 AM
WarPig1976 Gentleman, I've followed this... 09-17-2013, 10:26 AM
spentprimer Don't you think that would be... 09-17-2013, 06:17 PM
Peter Laidler I know warpig was a bit... 09-17-2013, 03:16 PM
303Guy Thank's Peter. That's enough... 09-18-2013, 05:18 AM
Peter Laidler Newtons cradle is the... 09-18-2013, 06:12 AM
spentprimer If the bolt handle going... 09-18-2013, 11:55 AM
Peter Laidler You don't need a bolt... 09-18-2013, 02:32 PM
Alan de Enfield 45972 Son (some time ago)... 09-18-2013, 03:34 PM
spentprimer This is good information to... 09-18-2013, 03:44 PM
Bruce_in_Oz From the original Oz... 09-18-2013, 08:50 PM
303Guy And rust! (Or dried crud). ... 09-19-2013, 01:27 AM
Son 45982 45983 45984 45985 ... 09-19-2013, 05:30 AM
Peter Laidler Nope.......... The striker... 09-19-2013, 05:39 AM
spentprimer Good Morning, It is 5:35... 09-19-2013, 07:05 AM
WarPig1976 Umm,,yah forget the duct... 09-19-2013, 05:50 PM
srtolly1 Not fearless, not real bright... 09-21-2013, 01:57 PM
303Guy That's very interesting. May... 09-19-2013, 07:08 PM
Ridolpho We all should have a friend... 09-19-2013, 07:52 PM
spentprimer As far as the resistence... 09-19-2013, 08:20 PM
303Guy So the Head separation... 09-19-2013, 07:43 PM
spentprimer I uploaded pictures to... 09-19-2013, 07:50 PM
Brian Dick Are those bullet holes in the... 09-19-2013, 08:09 PM
David TS LOL at Brian :D Tell you... 09-21-2013, 09:26 PM
Brian Dick Thanks. I sure thought they... 09-19-2013, 08:23 PM
browningautorifle Recycled roofing. The holes... 09-20-2013, 11:59 AM
Maxwell Smart Interesting video; no wonder... 09-19-2013, 10:32 PM
303Guy Right, here it... 09-20-2013, 01:27 AM
spentprimer Comparing to the photo you... 09-20-2013, 03:05 PM
jmoore A couple of thoughts since I... 09-23-2013, 02:51 AM
Son I would like to know the... 09-20-2013, 03:01 AM
Peter Laidler Ain't looked at this in any... 09-20-2013, 06:10 AM
Bruce_in_Oz A couple more things: With... 09-23-2013, 05:32 AM
303Guy Two bolts I looked at will... 09-24-2013, 12:22 AM
303Guy I've been looking at my... 09-24-2013, 01:48 AM
jmoore Photo #13 from Post #48: ... 09-24-2013, 02:33 AM
Peter Laidler All this hypothesis just goes... 09-24-2013, 06:05 AM
spentprimer My bolt dis-assembly tool... 09-24-2013, 08:59 AM
gew8805 Maybe the simplest solution... 09-24-2013, 09:15 AM
Peter Laidler Spent primer. Your rifle is... 09-24-2013, 12:25 PM
Robert303 Whilst I have a lot less... 09-24-2013, 01:01 PM
Peter Laidler To be honest Rob, he don't... 09-24-2013, 01:55 PM
Robert303 Thanks Peter but the rod and... 09-24-2013, 04:44 PM
spentprimer Fear not gentlemen, a dead... 09-24-2013, 05:48 PM
303Guy And that is the whole point. ... 09-24-2013, 08:47 PM
gsimmons You clock molester.....;) ... 09-24-2013, 06:30 PM
spentprimer When I was a little boy, I am... 09-24-2013, 06:51 PM
jmoore Well, we've gone from "it's... 09-25-2013, 03:04 AM
spentprimer Many years ago a friend... 09-25-2013, 08:22 AM
Peter Laidler 303 guy. I see the point... 09-25-2013, 07:14 AM
303Guy Thanks Peter, yes I am... 09-25-2013, 07:31 PM
Amatikulu I want to congratulate... 09-25-2013, 08:34 PM
spentprimer Well, a new bolt arrived... 09-26-2013, 08:08 PM
303Guy I take it then that the lug... 09-26-2013, 09:14 PM
spentprimer Hello Peter, I must... 09-26-2013, 09:57 PM
303Guy Interesting that the thinner... 09-26-2013, 11:08 PM
muffett.2008 I think you have that... 09-28-2013, 03:11 AM
5thBatt +1 only have a No4 because i... 09-28-2013, 03:42 AM
villiers `Tis in the eye of the... 09-28-2013, 01:07 PM
Peter Laidler But as battle rifles, No4's... 09-28-2013, 08:47 AM
gew8805 To me, the Rifle, No.4, using... 09-28-2013, 01:44 PM
Alan de Enfield Not sure wether to start a... 09-29-2013, 07:06 AM
browningautorifle In this case he came clean. ... 09-29-2013, 07:36 PM
browningautorifle I've never heard of headspace... 10-15-2013, 05:58 PM
spentprimer My friend is a retired... 10-15-2013, 09:38 PM
Bruce_in_Oz "Increasing" headspace by... 10-15-2013, 08:29 PM
spentprimer I measured the firing pin... 10-15-2013, 09:52 PM
Dad If I remember correctly the... 10-15-2013, 10:21 PM
Bruce_in_Oz From: Inspectorate... 10-15-2013, 11:44 PM
spentprimer Given that, I will leave well... 10-16-2013, 08:53 AM
Bruce_in_Oz But then from: ... 10-16-2013, 12:19 AM
Son Bruce, sorry, I cannot add... 10-16-2013, 07:18 AM
Dad Bruce, Question, I have this... 10-16-2013, 01:28 AM
ssj Does it have any other part... 10-16-2013, 02:33 AM
Bruce_in_Oz Good question. By the... 10-16-2013, 06:24 AM
Peter Laidler On the introduction of Mk7... 10-16-2013, 04:50 AM
CINDERS Well I sat here through 12... 10-16-2013, 07:30 AM
Peter Laidler I think Cinders is right. ... 10-16-2013, 11:08 AM
spentprimer Hello gentlemen, I just... 10-18-2013, 07:05 PM
CINDERS What about this? 10-19-2013, 01:02 AM
tbonesmith Hi guys, I'm very glad that... 10-19-2013, 08:48 AM
  1. 09-19-2013 05:30 AM #11
    Son is offline
    Advisory Panel Son's Avatar
    Join Date
    Oct 2006
    Last On
    01-18-2025 @ 07:22 PM
    Location
    On the right side of Australia, below the middle and a little bit in from the edge.
    Posts
    1,239
    Local Date
    06-15-2025
    Local Time
    08:48 PM
    Attachment 45982
    Attachment 45983
    Attachment 45984
    Attachment 45985

    Testing spring weights with a trigger pull gauge. No1 MkIII (& III*) (not all pictured)

    trigger, first pressure 3 to 4lb
    trigger, second pressure 5 to 6 1/2lb
    main spring, fired position, 7 to 9lb
    main spring, full-cock position, 14 to 16lb
    extractor, 7lb
    bolt head retaining spring, 10 to 16lb
    butt trap spring, 2 to 3lb

    Details of how to do these tests properly are in The Lee Enfield Story, starting about page 164
    Top   Send PMPM  Reply With Quote Register To Reply

  2. Thank You to Son For This Useful Post:

    spentprimer
« Previous Thread | Next Thread »

Similar Threads

  1. Quick advice needed - what tools needed for fitting forends
    By newcastle in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 12-17-2011, 03:09 PM
  2. Smle 1915 .22 Conversion Firing Pin Needed
    By neal455 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 01-20-2010, 03:27 PM
  3. Help needed ID'ing Firing Pins
    By normrp in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 4
    Last Post: 09-23-2009, 09:07 PM
  4. Gun Safe Advice Needed
    By mqstevens in forum The Watering Hole OT (Off Topic) Forum
    Replies: 26
    Last Post: 07-24-2009, 07:28 PM
  5. Advice needed.............
    By paulm in forum Milsurps General Discussion Forum
    Replies: 7
    Last Post: 03-16-2009, 08:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules & Site User Agreement

All times are GMT -4. The time now is 05:48 AM.
Powered by vBulletin™
Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.
Username Changing provided by Username Change (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Thread / Post Bookmarks provided by Thread / Post Bookmarking (Free) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.
Copyright ©2006 - 2024 by MILSURPS.COM - All Rights Reserved
Your IP Address: 216.73.216.12  |  OS: unknown  |  Browser: Mozilla 5.0
Loading...
Milsurps Voice Mail