1903 Mark I Finish

[John Beard]

So if the original finish was Parkerizing, would this be zinc, manganese or iron phosphating?

The original finish on your Mark I rifle was olive-grey parkerizing covered on all exposed surfaces with black paint. The receiver was finished with a different substance of unknown chemical composition that is best replicated with glossy black enamel.

Hope this helps.

J.B.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Arisaka99]

The original finish on your Mark I rifle was olive-grey parkerizing covered on all exposed surfaces with black paint. The receiver was finished with a different substance of unknown chemical composition that is best replicated with glossy black enamel.

Hope this helps.

J.B.

John;

You are the second knowledgeable collector I have heard this from. What is the source of the information and how come we don't routinely see at least some Mk1s in this original trim? Do you have any photos?

[John Beard]

John;

You are the second knowledgeable collector I have heard this from. What is the source of the information and how come we don't routinely see at least some Mk1s in this original trim? Do you have any photos?

The source of my information is examining literally hundreds of Mark I rifles from when I worked as a volunteer at the CMP.

All Mark I rifles went through WWII. The very large majority of them got overhauled and refinished. Most got re-barreled with 1942-dated barrels. The survival rate of original examples is very small. And those with the black paint still intact are virtually non-existent.

Be aware that some Mark I rifles were overhauled and refinished in batches during WWII. And got their Mark I parts re-installed back on them. So, there are some Mark I rifles in circulation that look original but, in fact, are not. The CMP, for example, just auctioned one. And that's how they found it.

I'll search my files for photos.

J.B.