No.5 47 C

[CINDERS]

I use a DP-3 to throw .2 grains under then tip it into a lee balance scale set at the final load charge weight and trickle the last .2gns in I have a restrictor on the throwing tube of the DP-3 as 08 is allot coarser and the restrictor stops the over throwing heaps for Win powders I can set it spot on with only about 4% of the weights being over and having to be readjusted 8208 is just as good at metering use that in my wifes full bore and F class.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Bindi2]

I use a DP-3 to throw .2 grains under then tip it into a lee balance scale set at the final load charge weight and trickle the last .2gns in I have a restrictor on the throwing tube of the DP-3 as 08 is allot coarser and the restrictor stops the over throwing heaps for Win powders I can set it spot on with only about 4% of the weights being over and having to be readjusted 8208 is just as good at metering use that in my wifes full bore and F class.

I am using a Redding micro adjustable thrower and Redding beam. My FO & FC loads are single digit variance. I only use 2208 now days for all medium sized cases.