+ Reply to Thread
Results 1 to 10 of 12

Thread: Mosin bore sizes

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    ptf18's Avatar
    Join Date
    Dec 2010
    Last On
    04-02-2015 @ 07:37 PM
    Location
    DFW, Texas
    Posts
    94
    Local Date
    05-10-2025
    Local Time
    10:00 PM

    Lead bullets

    What lead bullets are you using? I am interested in trying lead as I cant find jacketed bullets for the Mosin Nagants I have.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    05-11-2025
    Local Time
    05:00 AM
    Quote Originally Posted by ptf18 View Post
    I cant find jacketed bullets for the Mosin Nagants I have.
    I reckon you can - if you look in the right places!

    If you can find them try the Hornady 3130 round nose. These have a diameter of 0.312", They need to be seated well in with the case mouth up to the crimp ring. Crimp - no crimp? I just set the die so that the case mouth shows the barest rubbing mark, to ensure that there is not the slightest flare remaining to make chambering difficult. Sierra make a similar bullet with a 0.311" diameter.

    In both my 91/30 and a Finnishicon sniper, the Hornadys turned so-so performance into excellent performance. These round-nose types have a long cylindrical portion, so that the nose engages the lands before the bullet is totally free of the neck. This improves bullet guidance (and reduces gas-cutting).

    Boat tails in old service rifles with their often deep throats (compared with modern standards) will come free of the neck long before the nose engages. Since the necessary play between case and chamber means that the case neck is sitting on the bottom of the available space in the chamber. Gas will flow more easily over the top of the bullet, causing the bullet to be engraved slightly on the skew and thus emerge from the muzzle with a slight skew. This cannot be good for accuracy. Again and again I find that good old-fashioned round-nose bullets give the best grouping.
    Last edited by Patrick Chadwick; 04-06-2014 at 01:27 PM.

  3. Thank You to Patrick Chadwick For This Useful Post:


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member bob4wd's Avatar
    Join Date
    Sep 2009
    Last On
    12-13-2024 @ 04:05 PM
    Location
    tehachapi, California
    Posts
    209
    Local Date
    05-10-2025
    Local Time
    08:00 PM
    Thread Starter
    Quote Originally Posted by ptf18 View Post
    What lead bullets are you using? I am interested in trying lead as I cant find jacketed bullets for the Mosin Nagants I have.
    I apologize for not answering you before this, bad form on my part, no excuse, just slipped my mind. Anyways, I've been using Moyers bullets for all of my oddball ammo, seems to work just fine and prices are reasonable.

+ Reply to Thread

Similar Threads

  1. Aperature sizes in the Mk 1 sight
    By ptf18 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 10
    Last Post: 06-28-2012, 05:14 AM
  2. Shrinking sizes?
    By limpetmine in forum Q&A - VBBS Bulletin Board Software
    Replies: 3
    Last Post: 07-19-2010, 12:58 PM
  3. Pre-metric British clothing sizes
    By Longshaor in forum Milsurps General Discussion Forum
    Replies: 10
    Last Post: 03-12-2010, 07:49 AM
  4. chamber sizes
    By 351 power in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 3
    Last Post: 01-22-2010, 08:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts