3/44 Winchester

[RCS]

The stock appears in much better condition than the barrel & receiver, any markings on the stock. Could you take some additional photos of the internal parts, barrel markings and gas cylinder. The stock may have been refinished but difficult to say from the one photo.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[SRiverrat11]

The stock appears in much better condition than the barrel & receiver, any markings on the stock. Could you take some additional photos of the internal parts, barrel markings and gas cylinder. The stock may have been refinished but difficult to say from the one photo.

The stock has WRA/GHD visible but light. It has the v-cut in the trigger guard. My one concern on this was whether the stock had been sanded. I can now.tell if a Springfield stock has been sanded, thanks to this site but the stock on the Winchester is so much beefier I don't know. I will post more when I can get pics less than 3.6kb

[SRiverrat11]

The ordnance wheel is also visible holding the rifle, you just can't see it in this picture.If you guys need more pics of anything specific, let me know. Thanks again.

[SRiverrat11]

I forgot the gas cyclinder.

[SRiverrat11]

Here are the gas cylinder pictures and what appears to be( and I'm no expert) wood swelling on various parts of the stock.