+ Reply to Thread
Results 1 to 9 of 9

Thread: M38 Headspace question

Click here to increase the font size Click here to reduce the font size

Hybrid View

  1. #1
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 09:31 AM
    Location
    Victoria BC
    Posts
    31,028
    Real Name
    Jim
    Local Date
    05-08-2025
    Local Time
    07:33 AM
    That's just the sealant around the primers. It's not meant for artwork so it doesn't need to be neat. Doesn't look like anything's wrong with it.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Regards, Jim

  2. Thank You to browningautorifle For This Useful Post:


  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    beastybaconman's Avatar
    Join Date
    Nov 2014
    Last On
    04-04-2016 @ 10:01 AM
    Location
    Vermont
    Posts
    23
    Local Date
    05-08-2025
    Local Time
    10:33 AM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    That's just the sealant around the primers. It's not meant for artwork so it doesn't need to be neat. Doesn't look like anything's wrong with it.
    Ok, I just wanted to make sure because the guy I got it from said he never shot it. It's probably just because it's some old Yugoslavian ammo.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member vintage hunter's Avatar
    Join Date
    Dec 2010
    Last On
    @
    Location
    S.C.
    Age
    57
    Posts
    1,680
    Local Date
    05-08-2025
    Local Time
    10:33 AM
    Quote Originally Posted by beastybaconman View Post
    old Yugoslavian ammo.
    The green sealer and NNY head stamp suggests this is Serbian or Bosnian made ammo imported/sold by Jay Hanson, owner of the Hanson Ammunition Company, during the early to mid 1990's prior to the start up of the Bosnian War in '95. It was very good ammo. It's the same as the current PRVI brand. Some of the ammo sold under the Hanson name was made by IMI in Israel and IIRC it had red sealer and 1K OR IK head stamps.
    As Jim said there's nothing wrong with the ammo. And if the bolt and receiver numbers match then in all probability there's nothing wrong with the rifle either.
    I used to work part time at a gun shop in the early 90's when the Swede Mausers were plentiful and still being imported in. They were big sellers and it was hard at times to keep them in stock. I've handled hundreds while inspecting and checking head space prior to putting them out for sale and not once do remember finding one that failed to head space within spec. Some, mostly the M38's, appeared to be in like new condition. There was even a couple M41 snipers sans scope, base and mounts mixed in. The sad part is most were sporterized to some degree at the buyers request.
    Last edited by vintage hunter; 04-04-2015 at 03:09 PM.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    beastybaconman's Avatar
    Join Date
    Nov 2014
    Last On
    04-04-2016 @ 10:01 AM
    Location
    Vermont
    Posts
    23
    Local Date
    05-08-2025
    Local Time
    10:33 AM
    Thread Starter
    Quote Originally Posted by vintage hunter View Post
    The green sealer and NNY head stamp suggests this is Serbian or Bosnian made ammo imported/sold by Jay Hanson, owner of the Hanson Ammunition Company, during the early to mid 1990's prior to the start up of the Bosnian War in '95. It was very good ammo. It's the same as the current PRVI brand. Some of the ammo sold under the Hanson name was made by IMI in Israel and IIRC it had red sealer and 1K OR IK head stamps.
    As Jim said there's nothing wrong with the ammo. And if the bolt and receiver numbers match then in all probability there's nothing wrong with the rifle either.
    I used to work part time at a gun shop in the early 90's when the Swede Mausers were plentiful and still being imported in. They were big sellers and it was hard at times to keep them in stock. I've handled hundreds while inspecting and checking head space prior to putting them out for sale and not once do remember finding one that failed to head space within spec. Some, mostly the M38's, appeared to be in like new condition. There was even a couple M41 snipers sans scope, base and mounts mixed in. The sad part is most were sporterized to some degree at the buyers request.
    Oh, I just said it was Yugoslavian because on the box it says that's where the ammo was made and the box is pretty beat up so I figured it was old. I just shot it some more today and it seems like decent ammo. And I figured the rifle was probably fine, there weren't any signs of high pressure like a sticky bolt or anything but I'm no expert at reading fired cases so I just wanted to check.

+ Reply to Thread

Similar Threads

  1. Question about changing bolt to fix headspace
    By BBB.ACB in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 16
    Last Post: 09-03-2011, 08:23 AM
  2. Headspace question.
    By GBinSC in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 47
    Last Post: 02-27-2010, 01:10 AM
  3. Headspace question
    By shamrocks in forum M1/M2 Carbine
    Replies: 11
    Last Post: 03-30-2009, 02:48 AM
  4. headspace?
    By rifleman7mm in forum Gunsmithing for Old Milsurps
    Replies: 8
    Last Post: 11-30-2007, 10:52 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts