Fitting new stock?

[trfindley]

http://www.trfindley.com/pgtgfix.html

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[JimL]

I use a razor sharp 3/4" wood chisel and draw it along that surface indicated above taking a small amount of material off per stroke.

Two careful strokes on each surface, then try to assemble the rifle.
Maintain that angle those surfaces are pitched to the outside of the stock.
jiml

[JohnF]

http://www.trfindley.com/pgtgfix.html

Tom,

You may want to know that the stock modification picture and the 'how to' information you link to on your website was originally put together and posted on the old Jouster Forum by Gus Fisher. You might want to acknowledge his contribution and expertise for providing this free and valuable information to all.