Eddystone mag spring stamp?

[Chuckindenver]

i have a .50 cal ammo can full of new 17 and 03 springs.
when i first got them, they were in a wooden box,
marked,
magazine spring rifle. cal. 30 nothing more.
the top of the spring should have a step so it will fit in the follower, the bottom should be straight to fit the floorplate.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Jungle Jim]

I need to get in touch with chuckindenver concerning work I need done on my Sporterized 1917 Eddystone. He was recommended by several people. I believe the headspace needs to be reset, and a few parts a missing that blew off the rifle when a cartridge vented. The receiver and barrel were tested for hardness and magnafluxed (no cracks) Thanks, Jim

[Scott in Indiana]

Here's the spring that's in my Eddystone marked with an "E". Hope this helps.

Imageshack - m1917eddystone148.jpg [/URL]

[Scott in Indiana]

Here's a Remington M1917 spring marked "R".

Imageshack - spring006.jpg [/URL]