+ Reply to Thread
Results 1 to 10 of 69

Thread: .223 No.4 Revisiting

Click here to increase the font size Click here to reduce the font size

Hybrid View

newcastle .223 No.4 Revisiting 01-25-2016, 10:19 PM
browningautorifle I would just turn a barrel... 01-25-2016, 10:57 PM
Frederick303 I looked into this after... 01-25-2016, 11:41 PM
tbonesmith I am doing these conversions... 01-26-2016, 12:21 AM
tiriaq I was sorting out some stuff... 01-26-2016, 07:01 AM
bigduke6 Sometimes you need to weigh... 01-26-2016, 07:11 AM
newcastle I have no lathe so the work... 01-26-2016, 03:06 PM
bigduke6 Depending on the outsourced... 01-26-2016, 04:25 PM
newcastle Ok i think I'm good to go... 01-28-2016, 07:36 PM
browningautorifle Why not just place a WTB for... 01-29-2016, 01:31 PM
newcastle My only worry is that a 'less... 01-29-2016, 02:45 PM
Peter Laidler Always remember this with... 01-29-2016, 02:57 PM
newcastle I am fully expecting to make... 01-29-2016, 03:07 PM
Peter Laidler Oh, no..............! 01-29-2016, 05:15 PM
Bruce_in_Oz Coals to Newcastle? 01-29-2016, 08:31 PM
newcastle Coals to newcastle? I will... 01-31-2016, 12:06 AM
Bruce_in_Oz Things to consider: ... 01-31-2016, 11:50 PM
Peter Laidler Believe me Bruce, this rifle... 02-01-2016, 05:45 AM
newcastle This is the target 8 I am... 02-01-2016, 03:03 PM
tiriaq What is the status of the... 02-02-2016, 07:04 AM
newcastle it willbe incoming if I gte... 02-02-2016, 11:34 AM
englishman_ca A current project amongst... 02-05-2016, 08:08 PM
Surpmil 7.62x39 seems like a better... 02-15-2016, 01:59 AM
martins8589 I have a junk 1921 Lithgow... 02-15-2016, 02:18 AM
englishman_ca The rifle is a well beat... 02-16-2016, 11:42 AM
Bindi2 I was under the impression... 02-16-2016, 07:00 PM
Bruce_in_Oz .22RF uses a nominal .223"... 02-17-2016, 07:24 AM
newcastle Update from me - I received a... 02-22-2016, 02:23 PM
Sentryduty If you do not get an answer... 02-22-2016, 02:43 PM
Sentryduty https://www.milsurps.com/image... 02-22-2016, 08:29 PM
newcastle perfectly Thank you. Much... 02-22-2016, 11:40 PM
newcastle Alrigty then - no.4 mk2... 02-28-2016, 09:41 PM
Peter Laidler To ascertain the equality of... 02-29-2016, 05:02 AM
martins8589 Hello Peter, which part of... 02-29-2016, 06:57 AM
Peter Laidler It's the part that relates to... 02-29-2016, 07:58 AM
bigduke6 See link below ... 02-29-2016, 08:37 AM
newcastle Excellent information thank... 03-01-2016, 07:35 PM
Surpmil Seems most unlikely that a... 03-03-2016, 11:59 PM
newcastle 72777Quick update on this... 05-11-2016, 01:57 PM
Peter Laidler I think that you were a bit... 05-11-2016, 04:29 PM
browningautorifle I find that interesting, I'd... 05-11-2016, 06:27 PM
newcastle I didn't condemn it because... 05-11-2016, 06:50 PM
Peter Laidler I see the point BAR. But... 05-12-2016, 05:12 AM
zul Hello - new member here who... 08-30-2016, 03:11 AM
Surpmil zul, some serious testing has... 09-03-2016, 01:15 AM
Peter Laidler Zul, just a word in your... 09-03-2016, 04:32 AM
zul Peter, thanks for the reply.... 09-03-2016, 03:18 PM
bigduke6 The link I posted in #8 seems... 09-03-2016, 07:04 AM
zul Here is the mock-up I made. I... 09-03-2016, 03:28 PM
tiriaq Some thoughts on the... 09-03-2016, 08:10 PM
Bruce_in_Oz "Accurate Mag" in the US make... 09-03-2016, 10:47 PM
newcastle Hello all. The reason this... 09-04-2016, 02:54 PM
Surpmil I assume we are all thinking... 09-05-2016, 10:43 PM
browningautorifle With aluminum mags? How's... 09-05-2016, 10:46 PM
Surpmil I wouldn't use aluminum mags,... 09-10-2016, 01:18 PM
newcastle That is what i as thinking... 09-06-2016, 11:12 AM
tiriaq The AICS .223 magazine almost... 09-06-2016, 11:33 AM
tiriaq Took little cuts on either... 09-09-2016, 04:29 PM
newcastle Could you take many many... 09-09-2016, 09:00 PM
browningautorifle Most encountered .223 mags... 09-10-2016, 01:21 PM
Surpmil These look good: stainless... 09-12-2016, 09:07 PM
magellan hello world, Discussion on... 12-29-2016, 03:31 PM
browningautorifle Welcome to the forum... ... 12-30-2016, 12:00 AM
magellan homemade 5.45x39 mag to fit LE 12-31-2016, 06:31 AM
magellan Homemade 5.45x39 extractor... 12-31-2016, 06:36 AM
magellan feed and extract 12-31-2016, 06:40 AM
browningautorifle Great pics. That gives us... 12-31-2016, 11:14 AM
magellan mag détail pics 01-01-2017, 10:04 AM
browningautorifle Excellent...never mind... 01-01-2017, 11:30 AM
  1. #1
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 06:15 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,677
    Real Name
    Peter Laidler
    Local Date
    06-14-2025
    Local Time
    01:44 PM
    I think that you were a bit rash to condemn the barrel for a bit of pitting at the muzzle. I think that you should have accuracy tested it first. Wew used to gauge barrel muzzles and if they were pitted but passed the barrel gauge test, we'd accept it, depending on the accuracy test.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. Thank You to Peter Laidler For This Useful Post:


  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Yesterday @ 06:53 PM
    Location
    Victoria BC
    Posts
    31,130
    Real Name
    Jim
    Local Date
    06-14-2025
    Local Time
    05:44 AM
    Quote Originally Posted by Peter Laidlericon View Post
    if they were pitted but passed the barrel gauge test, we'd accept it
    I find that interesting, I'd have thought pitting would be a death knell...
    Regards, Jim

+ Reply to Thread

Similar Threads

  1. Revisiting the Name of the Garand rifle
    By Rick B in forum M1 Garand/M14/M1A Rifles
    Replies: 2
    Last Post: 01-02-2012, 11:07 PM
  2. Revisiting the Walther PPK
    By Newsfeed Hound in forum The Watering Hole OT (Off Topic) Forum
    Replies: 5
    Last Post: 05-31-2010, 05:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Loading...
Milsurps Voice Mail