Bren Gun: Help Needed!

[Peter Laidler]

Now that you have got to the assembly stage, you REALLY do need the little booklet I described in thread 2. Carrying handle sleeve is put onto the barrel from the breech end and secured with a plunger a spring an angled plug and 1 (sometimes 2) securing pins. Ball bearings........ Retain the front and rear mounting pins below the screw. You really need that book.............

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[Meerkoos]

Now that you have got to the assembly stage, you REALLY do need the little booklet I described in thread 2. Carrying handle sleeve is put onto the barrel from the breech end and secured with a plunger a spring an angled plug and 1 (sometimes 2) securing pins. Ball bearings........ Retain the front and rear mounting pins below the screw. You really need that book.............

Thanks Peter. I do have the booklet from Ian Skennerton, but there seems to be no mention of the pins you mentioned. I will see what I can do.