Looking for information on beautiful Steyr M95

[Eaglelord17]

From what I am able to tell it appears to be a 1915 accepted M95 made at Steyr (the original acceptance mark is mostly faded with only the light '15' remaining). The original acceptance mark could have just been light (very common, especially during WWI) or it could have been partially removed by the Czechs.

This rifle was used by the Czechslovakia post-WWI, as evidenced by the 'S-Lion-5'. That particular stamp means it was issued to the Ceske Budejovice military district (there are codes for the 1-12 after the lion part of the stamp 5 being the district I listed). That stamp was also only used from 1919-1922. Odds are the rifle is in the original 8x50r as the Czechs never adopted the 8x56r round, and it doesn't have any evidence of the 'S' or 'H' marking on the barrel shank (most of the original 8x50r rifles found come from either the Czechs or Italy).

I can't help much with the butt-plate markings, but overall a nice example of a Czech owned M95

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[LesPaui+sg=win]

From what I am able to tell it appears to be a 1915 accepted M95 made at Steyr (the original acceptance mark is mostly faded with only the light '15' remaining). The original acceptance mark could have just been light (very common, especially during WWI) or it could have been partially removed by the Czechs.

This rifle was used by the Czechslovakia post-WWI, as evidenced by the 'S-Lion-5'. That particular stamp means it was issued to the Ceske Budejovice military district (there are codes for the 1-12 after the lion part of the stamp 5 being the district I listed). That stamp was also only used from 1919-1922. Odds are the rifle is in the original 8x50r as the Czechs never adopted the 8x56r round, and it doesn't have any evidence of the 'S' or 'H' marking on the barrel shank (most of the original 8x50r rifles found come from either the Czechs or Italy).

I can't help much with the butt-plate markings, but overall a nice example of a Czech owned M95

Thank you sir. That clears up a lot! I found one reloader who loads 8x50r so I might spring and order a couple of boxes and see how she does. I dont see very many of these for sell, at least on GunBroker. Do you have any general range of value? I purchased figuring it may one day make a nice collectable!



---------- Post added at 12:41 PM ---------- Previous post was at 12:34 PM ----------

Thank you sir. That clears up a lot! I found one reloader who loads 8x50r so I might spring and order a couple of boxes and see how she does. I dont see very many of these for sell, at least on GunBroker. Do you have any general range of value? I purchased figuring it may one day make a nice collectable!

Learned on another forum that the butt plate marking is a unit number, by the way. Picked up this nice example of a Chinese Type 53 the same day! Great bore and an amazing shooter. All matching to boot!

[Merle]

Thank you sir. That clears up a lot! I found one reloader who loads 8x50r so I might spring and order a couple of boxes and see how she does. I dont see very many of these for sell, at least on GunBroker. Do you have any general range of value? I purchased figuring it may one day make a nice collectable!



---------- Post added at 12:41 PM ---------- Previous post was at 12:34 PM ----------


Learned on another forum that the butt plate marking is a unit number, by the way. Picked up this nice example of a Chinese Type 53 the same day! Great bore and an amazing shooter. All matching to boot!

https://www.milsurps.com/images/impo...h35pavj9-1.jpg
https://www.milsurps.com/images/impo...g8yxvpjd-1.jpg
https://www.milsurps.com/images/impo...caedcj53-1.jpg

I have heard it it best to use the proper clips when shooting these - rather than load a round into the chamber & force the extractor to ride up & over the rim. Something about very old metal in the extractor......

[LesPaui+sg=win]

I have heard it it best to use the proper clips when shooting these - rather than load a round into the chamber & force the extractor to ride up & over the rim. Something about very old metal in the extractor......

In regards to the M95? I have a couple of original enbloc strippers enroute to me from a friendly fella on a forum. In regards to the Mosin, I have strippers o' plenty for it!



---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------

I thought that looked kind of funny for an acceptance mark. Oh well I've still got a lot to learn. I've only had mine for about a month, and I never really researched them until I thought about buying one. I've unfortunately never seen a rifle in person, let alone one still in 8x50R but would like to find one someday.

Buddy, I dont think we will ever know the full history behind these neat rifles. They are by far the most difficult milsurp I have tried to research. I finally have a general idea about my rifle. Lol