-
Legacy Member
Start bidding on Ebay and start visiting the big gunshows in your area. You will learn fast. One more thing, call DuPage Trading in Phoenix. Jim is a good guy and will try to help.
-
-
05-12-2017 07:30 PM
# ADS
Friends and Sponsors
-
Legacy Member
Thanks for the advice Steve, Checking out DuPage right now.
-
-
-
Legacy Member
A correct stock would be a "straight", non-grasping groove with pins, not stock bolts, with an FJA stamp and a high hump handguard without a capsule-shaped fixturing slot on the inside. Such stocks, while not as easy to obtain as they were a few years back, can still be found. As BAR suggested, you can find a M1903A3 stock with pins, which would be an acceptable substitute.
Rick, I found a Scant "stright" stock looks like it had bolts though and not pins; not sure... Should this be acceptable for my 1903?
-
-
"Scant" straight stock is sort of a contradiction in terms! A "Scant" stock was one with a "semi" full grip stock; a straight stock was just that.
See pictures below:
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.
--George Orwell
-
-
Legacy Member
"Scant" straight stock is sort of a contradiction in terms! A "Scant" stock was one with a "semi" full grip stock; a straight stock was just that.
]
But would it be appropriate to use with my [1942] 1903 Springfield (Remington)?
-
-
Will it fit and work? Yes; Is it original to the manufacture? No.
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.
--George Orwell
-
-
Legacy Member
Rick, Thanks again.. I found a Straight stock with pins for $125.00 so I'll just get it when I return from the Philippines (if he still has it) it the gun shop doesn't have one cheaper. I was going to try and pick one up in the Philippines but I guess you can't bring USGI parts back in the country anymore.
-
-
Tell me all about it - the Philippines in early WWII is my "specialty". Had a Rock Island M1903 that a guy over there was willing to sell - but found out the same thing - no imports.
I visited Bataan and Corregidor in 2014 - a trip of a lifetime!!
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.
--George Orwell
-
-
Legacy Member
I visited Bataan and Corregidor in 2014 g[/url]
We go to the Philippines almost every year. Took my dad there 2009 we were at the other 00 marker
https://youtu.be/HZ_tkTS7Df8
-
-
Can't get the link to work.
People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.
--George Orwell
-