Semi Bren Primer Flow

**Brit plumber** · 06-29-2017 07:58 AM

The end of that firing pin looks odd, is it completely squared off?

**Highly Recommended** · 06-29-2017 07:58 AM

A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered. Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping. In the USA shipping is $5.00 for media mail. I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!). CLICK BANNER to send me a PM for International pricing and shipping.

Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles.

Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons

Specializing in premium ammunition and reloading components.

Your source for the finest in High Power Competition Gear.

Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.

**browningautorifle** · 06-29-2017 09:58 AM

Originally Posted by Brit plumber

is it completely squared off

It appears to be new and I should think subject to fitment and adjusting.

**Joe H** · 06-30-2017 08:12 AM

Guys,

I found some 7.62 Nato cases I fired in my Bren. Ridges do not extend past the base of the case.

Joe

Attachment 85515

**browningautorifle** · 06-30-2017 11:50 AM

Those look absolutely correct...

**alterego** · 06-30-2017 01:53 PM

Did u "tune" your ejector?

**Joe H** · 07-06-2017 07:01 AM

Originally Posted by alterego

Did u "tune" your ejector?

Alterego,

Did nothing to the ejector. Why would that have anything to do with the "primer flow"?

Firing pin is the original FA pin with an extension added on. No change to the cross pin. FP spring lightened up for semi.

Joe

**ActionYobbo** · 07-16-2017 10:20 AM

this is us waiting for an update

**browningautorifle** · 07-16-2017 10:22 AM

Originally Posted by Mr E

us waiting

Sort of typical though...

**Peter Laidler** · 07-16-2017 10:31 AM

That looks like a group of Armourers on a range day with GPMG's. Waiting for something to happen or go wrong. It never does!

**browningautorifle** · 07-16-2017 02:45 PM

Originally Posted by Peter Laidler

GPMG's

So, back up to the 1919A4s then, lots of work then. At least when we had ours out there was. Guns would be running back and forth from line to truck and the armorers would be working non stop...not the C6s though.

Thread: Semi Bren Primer Flow

Thread Tools

Search Thread

Display

Thank You to Joe H For This Useful Post:

Thank You to Peter Laidler For This Useful Post:

Thank You to browningautorifle For This Useful Post:

Similar Threads

Bren semi auto build - USA

semi auto Bren in 308?

Semi-auto Bren new built receivers?

semi-auto registed bren gun

Tags for this Thread

Posting Permissions